NTSB Updates Investigation Into Jackson Hole Runway Excursion | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Sat, Mar 01, 2008

NTSB Updates Investigation Into Jackson Hole Runway Excursion

Cites Possible Maintenance Error In Connecting Antiskid Sensors

In its continuing investigation of an incident in which a United Airlines Airbus A320 departed the runway during landing at Wyoming's Jackson Hole Airport on the evening of February 25, the National Transportation Safety Board (NTSB) has developed the following factual information during its on-scene investigation.

Investigators with the safety board have determined the airplane came to rest 116 feet past the end of the runway, and 140 feet to the right of the runway centerline. A heavy skid mark was found on the runway associated with the inboard tire of the left main landing gear. This tire was found deflated and showed wear consistent with a skid. Upon exiting the runway, both engines ingested snow and sustained internal damage. The aircraft itself was not substantially damaged.

Examination of the left main landing gear brakes revealed that the inboard and outboard wheel speed tachometer wires were cross-connected. Such a configuration would be likely to cause the antiskid system to use the inboard wheel speed to control the outboard braking, and vice versa. In such a situation, it would be likely that when the inboard tire began to skid, the antiskid system would release the pressure on the outboard brake instead of the inboard brake.
 
Examination of maintenance records indicated that both main landing gear units were replaced on the incident airplane in early February 2008. The Safety Board is also investigating another United A320 incident with similar circumstances that occurred on October 9, 2007.

Another area of the investigation is the inoperability of one of the emergency evacuation slides. The slide at the front left door deployed when the door was opened during the evacuation but did not inflate. The manufacturer of the slide will assist the NTSB in its investigation of the cause of the failure.

Information obtained from the flight data recorder (FDR) and the cockpit voice recorder (CVR) is being analyzed at the Safety Board's laboratory in Washington.

Investigators are continuing to gather factual information in aircraft performance, human factors and other areas.

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Term (04.26.24): DETRESFA (Distress Phrase)

DETRESFA (Distress Phrase) The code word used to designate an emergency phase wherein there is reasonable certainty that an aircraft and its occupants are threatened by grave and i>[...]

Aero-News: Quote of the Day (04.26.24)

"General aviation is at the forefront of developing and introducing innovative technologies that will transform the entire aviation industry..." Source: Kyle Martin, Vice President>[...]

ANN's Daily Aero-Term (04.27.24): Direct

Direct Straight line flight between two navigational aids, fixes, points, or any combination thereof. When used by pilots in describing off-airway routes, points defining direct ro>[...]

ANN's Daily Aero-Linx (04.27.24)

Aero Linx: Women in Corporate Aviation Women in Corporate Aviation support individuals seeking career advancement and professional development in the business aviation industry. Me>[...]

Aero-News: Quote of the Day (04.27.24)

“We would like to thank the many volunteers that help throughout the year to pull off the event, as well as the several reviewers, judges, and SURVICE staff that provide team>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC