AD: Bombardier, Inc., Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.10.24

Airborne-NextGen-06.11.24

Airborne-Unlimited-06.12.24 Airborne-FltTraining-06.13.24

Airborne-Unlimited-06.14.24

Tue, Jul 14, 2020

AD: Bombardier, Inc., Airplanes

AD 2020-12-15 Requires A Measurement Of The Trunnion Nut Torque Of The V-Band Clamp

The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes.

This AD was prompted by a report that certain safety valves at the left- and right-hand sides of the cabin pressure control system were not installed correctly and that the trunnion nuts used to fasten the V-band clamp were over torqued. This AD requires a measurement of the trunnion nut torque of the V-band clamp, an inspection of the safety valve and airplane bulkhead flange area for any cracking and deformations, and corrective actions, if necessary. The FAA is issuing this AD to address the unsafe condition on these products. This AD becomes effective July 24, 2020.

Supplementary Information: Transport Canada Civil Aviation (TCCA), which is the aviation authority for Canada, has issued Canadian AD CF-2020-16, dated May 15, 2020 (referred to after this as the Mandatory Continuing Airworthiness Information, or “the MCAI”), to correct an unsafe condition for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. You may examine the MCAI on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-0575.

This AD was prompted by a report that certain safety valves at the left- and right-hand sides of the cabin pressure control system were not installed correctly and that the trunnion nuts used to fasten the V-band clamp were over torqued. The FAA is issuing this AD to address incorrect installation of the safety valves and over-torqued trunnion nuts, which could cause damage to the safety valve flange and could result in pressure leakage or cabin depressurization at altitude. See the MCAI for additional background information.

FMI: www.regulations.gov

Advertisement

More News

ANN FAQ: Submit a News Story!

Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]

Aero-News: Quote of the Day (06.12.24)

“The legislation now includes a task force with industry representation ensuring that we have a seat at the table and our voice will be heard as conversations about the futur>[...]

ANN's Daily Aero-Linx (06.12.24)

Aero Linx: Waco Museum The WACO Historical Society, in addition to preserving aviation's past, is also dedicated and actively works to nurture aviation's future through its Learnin>[...]

ANN's Daily Aero-Term (06.12.24): Adcock Range

Adcock Range National low-frequency radio navigation system (c.1930-c.1950) replaced by an omnirange (VOR) system. It consisted of four segmented quadrants broadcasting Morse Code >[...]

Airborne Affordable Flyers 06.06.24: 200th ALTO, Rotax SB, Risen 916iSV

Also: uAvionix AV-Link, Does Simming Make Better Pilots?, World Games, AMA National Fun Fly Czech sportplane manufacturer Direct Fly has finished delivering its 200th ALTO NG, the >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC