First Engine Assembled For DARPA And Boeing Reusable Experimental Spaceplane | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.17.24

Airborne-NextGen-06.18.24

Airborne-Unlimited-06.12.24 Airborne-FltTraining-06.13.24

Airborne-Unlimited-06.14.24

Fri, Jun 08, 2018

First Engine Assembled For DARPA And Boeing Reusable Experimental Spaceplane

AR-22 Is Derived From Space Shuttle Main Engine

Aerojet Rocketdyne has completed assembly of its first AR-22 rocket engine built for Boeing as part of the U.S. Defense Advanced Research Projects Agency (DARPA) Experimental Spaceplane program. This new Boeing spaceplane, called Phantom Express, is intended to demonstrate a new paradigm for more routine, responsive and affordable space access.

Aerojet Rocketdyne’s AR-22 engine, derived from the Space Shuttle Main Engine that was designed from the outset for reusability, is the main propulsion for Phantom Express.

“Phantom Express builds on our legacy of reusable space flight experience to provide the ability to quickly augment and replace on-orbit capabilities, which face an increasing array of threats from potential adversaries,” said Eileen Drake, Aerojet Rocketdyne CEO and president. “Our immediate task is to demonstrate this rapid turnaround capability for this engine on the ground, paving the way for a demonstration program.”

The AR-22 engine is capable of generating about 375,000 pounds of thrust and was designed to fly 55 missions with service every 10 missions. This reusability feature makes the AR-22 ideally suited for Phantom Express.

The reusable Phantom Express spaceplane will take off vertically and land horizontally. The vehicle will be equipped with an expendable second stage capable of placing up to 3,000 pounds of payload into low Earth orbit.

“The aircraft-like operations of Phantom Express are an important factor in the rapid turnaround of this spaceplane,” said AR-22 Program Manager Jeff Haynes. “Additionally, the engine has a hinged nacelle that makes it easier to access and inspect the engines for rapid turnaround.”

Aerojet Rocketdyne assembled the AR-22 at its facility at NASA’s Stennis Space Center in Mississippi. The engine will undergo a series of daily hot-fire tests at Stennis starting this summer to demonstrate its ability to support the high flight rates envisioned for Phantom Express. These tests will also provide valuable insight that will be used to refine Phantom Express flight and turnaround procedures, while also informing the design requirements for the new ground infrastructure that Boeing is developing for the flight program.

(Images provided with Aerojet Rocketdyne news release)

FMI: www.rocket.com

Advertisement

More News

USCG MH-60 To The Rescue (Again) -- Rescues 4 Boaters

Capsized Vessel Located Near Dauphin Island, Alabama The Coast Guard rescued four boaters after their vessel capsized near Dauphin Island, Alabama, Thursday. Coast Guard District E>[...]

Gray Eagle Order Placed for Army National Guard

Reserve Components Looking to Improve In-House General Atomics Aeronautical Systems announced a fresh order for a dozen Gray Eagle 25M UAVs with accompanying equipment, for fulfill>[...]

Aero-Biz Survival 101 (1120a): Expert Ideas To Help You Through Tough Times

Brand New! Avoid The Need For A Comeback... Get Your Marketing Right, Right Now! Some time ago, the Aero-News Network, responding to numerous requests, established a marketing and >[...]

Airborne 06.03.24: Rotax 915/916 SB, Starship 4 Ready?, B-17 Mementos

Also: Hubble On Pause, FedEx Pilots Picket, Nexus eVTOL, VFS Honors The Rotax folks have published a Service Bulletin after issues were noted that may affect all R915i and R916i se>[...]

Mid-Continent Instruments and Avionics Mourns Former Leader

John W. Winter of AEA and Avionic Fame Passes John W. Winter brought Mid-Continent Instrument Company into the modern era in 1980, purchasing the firm and using it as a base for ex>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC