AD: The Boeing Company Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.19.25

Airborne-NextGen-05.20.25

AirborneUnlimited-05.21.25

Airborne-AffordableFlyers-05.22.25

AirborneUnlimited-05.23.25

Wed, Aug 17, 2022

AD: The Boeing Company Airplanes

AD 2022-13-10 Prompted By Reports Of Burned Boeing Material Specification (BMS) 8-39 Urethane Foam

The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 767-200, -300, -300F, and -400ER series airplanes.

This AD was prompted by reports of burned Boeing Material Specification (BMS) 8-39 urethane foam, which is a material with fire-retardant properties that deteriorate with age. This AD requires replacing certain BMS 8-39 foam pads with Nomex felt in certain areas, removing certain BMS 8-39 foam pads in a certain area (which includes a general visual inspection to find BMS 8-39 foam pads), and inspecting the corner seals to determine if the corner seals were replaced, and replacing affected corner seals. This AD also prohibits the installation of BMS 8-39 urethane foam seal in certain locations. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective September 20, 2022.

 

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain The Boeing Company Model 767-200, -300, -300F, and -400ER series airplanes. The NPRM published in the Federal Register on January 31, 2022 (87 FR 4828). The NPRM was prompted by reports of burned BMS 8-39 urethane foam, which is a material with fireretardant properties that deteriorate with age. In the NPRM, the FAA proposed to require replacing certain BMS 8-39 foam pads with Nomex felt in certain areas, removing certain BMS 8-39 foam pads in a certain area (which includes a general visual inspection to find BMS 8-39 foam pads), and inspecting the corner seals to determine if the corner seals were replaced, and replacing affected corner seals. The FAA is issuing this AD to address degraded BMS 8-39 urethane foam used in seals, which may fail to maintain sufficient halon concentrations in the cargo compartments to extinguish or contain fire or smoke, and may result in penetration of smoke or fire into the flight compartment, leading to possible loss of control of the airplane.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (05.29.25): Terminal Radar Service Area

Terminal Radar Service Area Airspace surrounding designated airports wherein ATC provides radar vectoring, sequencing, and separation on a full-time basis for all IFR and participa>[...]

ANN's Daily Aero-Term (05.30.25): Very High Frequency (VHF)

Very High Frequency (VHF) The frequency band between 30 and 300 MHz. Portions of this band, 108 to 118 MHz, are used for certain NAVAIDs; 118 to 136 MHz are used for civil air/grou>[...]

Aero-News: Quote of the Day (05.30.25)

“From approximately November 2021 through January 2022, Britton-Harr, acting on behalf of AeroVanti, entered into lease-purchase agreements for five Piaggio-manufactured airc>[...]

Airborne 05.23.25: Global 8000, Qatar B747 Accepted, Aviation Merit Badge

Also: Virtual FLRAA Prototype, IFR-Capable Autonomous A/C, NS-32 Crew, Golden Dome Missile Defense Bombardier announced that the first production Global 8000 successfully completed>[...]

ANN's Daily Aero-Linx (05.30.25)

Aero Linx: The 1-26 Association (Schweizer) The Association’s goal is to foster the helpfulness, the camaraderie, and the opportunity for head-to-head competition that is fou>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC