AD: Airbus | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Fri, Sep 07, 2007

AD: Airbus

AD NUMBER: 2007-18-09
MANUFACTURER: Airbus
SUBJECT: Airworthiness Directive 2007-18-09
SUMMARY:
The FAA is superseding an existing airworthiness directive (AD), which applies to all Airbus Model A318-100, A319-100, A320-200, A321-100, and A321-200 series airplanes, and Model A320-111 airplanes.

That AD currently requires an inspection to determine whether certain braking and steering control units (BSCUs) are installed or have ever been installed.

For airplanes on which certain BSCUs are installed or have ever been installed, the existing AD requires an inspection of the nose landing gear (NLG) upper support, and corrective action if necessary; and a check of the NLG strut inflation pressure, and an adjustment if necessary. For some of these airplanes, the existing AD also requires a revision to the aircraft flight manual to incorporate an operating procedure to recover normal steering in the event of a steering failure.

This new AD instead requires repetitive inspections of the NLG upper support, and related investigative/corrective actions in accordance with new service information; and removes the onetime inspection that was required by the existing AD. This new AD also provides an optional terminating action for the repetitive inspections.

This AD results from a report of an incident wherean airplane landed with the NLG turned 90 degrees from centerline, and from additional reports of NLG upper support anti-rotation lugs rupturing in service.

We are issuing this AD to prevent landings with the NLG turned 90 degrees from centerline, which could result in reduced controllability of the airplane.

FMI: www.faa.gov/regulations_policies/airworthiness_directives/

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC