AD: Sikorsky Aircraft Corporation Helicopters | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Wed, Apr 21, 2021

AD: Sikorsky Aircraft Corporation Helicopters

AD 2021-08-18 Prompted By The Discovery That Certain Part Numbers Listed In AD 2021-04-16 Are Incorrect

The FAA is superseding Airworthiness Directive (AD) 2021-04-16 which applied to certain Sikorsky Aircraft Corporation (Sikorsky) Model S-92A helicopters.

AD 2021-04-16 required a one-time inspection of the landing gear for components with non-conforming threads and removal of any non-conforming threaded hinge pin and main landing gear (MLG) and nose landing gear (NLG) actuator pins. AD 2021-04-16 also prohibited installing certain part-numbered hinge and actuator pins on any helicopter. This AD requires the same actions but corrects erroneous part numbers. This AD was prompted by the discovery that certain part numbers listed in AD 2021-04-16 are incorrect. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective April 29, 2021

Supplementary Information: The FAA issued AD 2021-04-16, Amendment 39-21438 (86 FR 13631, March 10, 2021) (AD 2021-04-16), for Sikorsky Model S-92A helicopters with serial numbers (S/Ns) 920006 through 920334 inclusive. AD 2021-04-16 required a one-time inspection of the landing gear and the removal from service of certain serial-numbered threaded hinge pins part number (P/N) 92250-12281-101 and certain serial-numbered MLG and NLG actuator pins P/N 92250-12287-101 and 92250-12287-103. AD 2021-04-16 was prompted by the manufacturer discovering nonconforming threads, resulting in a life limit reduction on multiple landing gear components including threaded hinge pins and MLG and NLG actuator pins. The FAA issued AD 2021-04-16 to prevent failure of components on the MLG and NLG. The unsafe condition, if not addressed, could result in damage to the helicopter and reduced ability to control the helicopter during landing.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC