Adam Opens Up on A700 | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-12.02.24

Airborne-NextGen-12.03.24

Airborne-Unlimited-12.04.24

Airborne Flt Training-12.05.24

Airborne-Unlimited-12.06.24

Thu, Jul 31, 2003

Adam Opens Up on A700

At a press briefing at Oshkosh Tuesday, Rick Adam brought reporters up to speed on progress being made on the company's centerline-thrust twin, the A500, as well as on what they hope will become their newest coup, the A700 twinjet.

Though the company is "focusing 95% of our efforts at certifying the A500," Rick Adam told us, there has been a lot of progress on the A700, which is the first twinjet to fly with only Williams FJ-33 power.

That's an interesting side note, that FJ-33. ANN asked John Knudsen, Adam President, whether Sunday's first flight of the A700 was the first time that the new Williams engine had flown as the only power on an aircraft. (The engine has significant time as a "second engine" on test aircraft.)

John's answer was that, yes it was, "as far as anyone will talk about it."

President Knudsen also answered one of our more-pointed questions, about how a 250kt wing (as on the A500) would work on a .7Mach machine (the A700). John's non-technical answer was that the wing's airfoil had a wide effective range, and that both numbers were well within it. Would it work on a yet-faster machine? "Why would you want to do that?" John asked. Good question -- if you need to get into a different range, just pick a different airfoil.

Back at the official talk, Mr. Adam said the new plane, which is largely based on the A500, is piggybacking on a lot of the technology developed for the piston-powered twin. In fact, he teased us a bit about why the nomenclature -- A500  and A700 -- didn't include an A600. "We're considering [though he was emphatic to note, not 'planning'] a later demand for perhaps a turbine, pusher single."

Always Optimistic, Staying on Schedule

Though Adam hasn't yet filed for certification, he says he expects the airplane to be certified in "late 2004." He sees performance numbers of 340 to 370 knots (depending on the engines' thrust), with a range up to 1400 nm, depending on loading; and he's hoping for a ceiling of as much as 41,000 feet.

Speaking of range, Adam sees the air taxi market to be a large customer. "With all the seats full, you can easily go 500 nm," he said. "That's perfect for a lot of the Eastern Corridor flying."

The aircraft will be rolled out through Customer Service Centers. The plan is to utilize a relationship that Adam is building with Cirrus Design, Rick said, and have the Adam looked after by a percentage of those Cirrus-friendly FBOs.

As to the differences between the A500 and the A700: the fuselage on the jet is 30" longer; you'll also notice the "jet" nose, and a 100-gallon fuel tank on the belly. "We took off about a thousand pounds," Rick explained, "when we went from piston engines to jets. That's good, because we need that for the extra fuel." One will also note the tail of the aircraft (but not flying surfaces), and the nacelles.

The machine is just about the same planform size as a CJ-1, but, due to composite construction, roughly 30% (~3000lbs) lighter, at gross. It also features a more-rectangular cross-section in the fuselage, for a noticeable improvement in shoulder- and headroom.

One more thing: the interior, on display (and air-conditioned!) features six cup holders.

...and We Don't Know

There are still a few items left unknown. The de-icing, or ice protection system, is still under discussion.

Just how fast it will go will depend on the thrust of the FJ-33s. "Depending on the FADEC," Rick told us, "thrust can be pretty much anywhere  from 1200 to 1500 pounds." They're set at the lower number now, and that's where they'll probably stay, Adam said, "unless we see a need for more -- if the plane gets heavier, or we need more climb." He noted, "We don't think that's going to happen." So today's customers can plan for a livable fuel consumption rate.

As to fatigue and ultimate life of the airframe, Mr. Adam said that he expects "initial certification life to be 5000 hours," rising as more fatigue testing and flight time get documented.

And those customers?

Rick Adam replied to an audience question: "We're not taking orders, or deposits, until our numbers are more fully-developed. That's what a lot of companies do, when they need some capital. We're in good shape there."

FMI: www.adamaircraft.com

Advertisement

More News

NTSB Final Report: Michael G Darby DARD 1

After Landing He Realized He Had Misidentified The Runway And Landed In Softer Snow Analysis: The pilot reported that during approach to the snow-covered runway in flat light condi>[...]

ANN's Daily Aero-Term (12.04.24): Arresting System

Arresting System A safety device consisting of two major components, namely, engaging or catching devices and energy absorption devices for the purpose of arresting both tailhook a>[...]

Aero-News: Quote of the Day (12.04.24)

“We learned a great deal in the process, such as greater coding skills, soldering techniques, and video editing skills...” Source: Cuyahoga County Team Captain John Ana>[...]

Airborne Affordable Flyers 11.26.24: BushCat's Back!, LODA Update, DRL Miami

Also: Van Celebrates 85th, Trio Pro Pilot Autopilot, Joby on MSFS24, Sonex Transition The BushCat was manufactured in South Africa by SkyReach beginning in 2014, selling its first >[...]

Airborne 12.02.24: Electra FG EIS, Prez Osprey Problems, Starship Wants 25

Also: EAA Ray Foundation, MagniX Records, Ruko U11MINI Drone, RCAF PC-21s Elektra Solar recently put the first aircraft from its Elektra Trainer Fixed-Gear (FG) family into service>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC