AeroSports Update: Beware Of Jack Frost | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-10.20.25

AirborneUnlimited-
10.14.25

Airborne-Unlimited-10.15.25

Airborne-NextGen-10.16.25

AirborneUnlimited-10.17.25

Mon, Nov 02, 2015

AeroSports Update: Beware Of Jack Frost

As Colder Weather Approaches It’s Important To Understand The Dangers Of Frost On The Aircraft

The basic theory regarding the formation of ice is quite simple; it requires below freezing temperatures and moisture. That makes it pretty easy to understand from the broadest point of view to determine when ice will or will not occur. However, when it comes to frost things get a little more complicated.

We are primarily concerned about frost when we see it on an airplane prior to flight. What seems like a very light coating of frozen moisture, is actually a rough surface that, if left on the wings and other lifting and control surfaces of the aircraft, can degrade performance to such an extent that it may not be safe to fly.

The age-old principle of frost formation is if a solid surface is chilled below the dew point of the surrounding humid air and the surface itself is colder than freezing, ice (frost) will form on it. If the air is moist, desublimation of the water vapor occurs and frost appears. In this case, the surface we are talking about is the airframe of an airplane.

There’s more to it than that, but because frost requires moisture, a close temperature dew point spread and a surface that is freezing, it makes it easier to understand how to avoid it. The most logical way to avoid a morning frost on an airplane is to keep it in a hangar that is above freezing, even if only by a couple of degrees.

If frost does form on an airplane it’s absolutely mandatory that it at least be removed from the wings, the tail surfaces, and all control surfaces. Leaving any of these surfaces with any frost can lead to asymmetrical stalls resulting in uncontrolled rolling of the airplane at lift off. At the very minimum, frost could increase the stall speed by a significant amount and reduce the airplane’s wing lift capacity by as much as 30 percent.

Many pilots have heard that polishing the frost is another way to decrease its detrimental effect on aircraft performance, but there is actually very little information available to prove that this is effective.

Frost may look harmless, but it has been a major contributor to the loss of control in the early stages of the flight.

FMI: Aviation Weather For Pilots

Advertisement

More News

Airborne 10.15.25: Phantom 3500 Confounds, Citation CJ3 Gen2 TC, True Blue Power

Also: Kodiak 100 Joins USFS, Innovative Solutions & Support Renamed, Gulfstream Selects Honeywell, Special Olympics Airlift The Phantom 3500 mockup made an appearance where the>[...]

Airborne 10.14.25: Laser Threat, VeriJet BK, Duffy Threatens Problem Controllers

Also: USAF Pilots, Atlanta Tower Evac, Archer Spotlight Dissipates, Hop-A-Jet Sues A social-media call for people to point lasers at aircraft flying over Portland’s ICE facil>[...]

Aero-News: Quote of the Day (10.20.25)

“We developed this prototype from concept to reality in under a year. The U-Hawk continues the Black Hawk legacy of being the world’s premier utility aircraft and opens>[...]

ANN's Daily Aero-Term (10.20.25): Flameout Pattern

Flameout Pattern An approach normally conducted by a single-engine military aircraft experiencing loss or anticipating loss of engine power or control. The standard overhead approa>[...]

NTSB Final Report: Schweizer SGS 2-33A

Student Pilot’s Failure To Maintain Airspeed And Altitude Resulting In A Collision With The Ground During The Base To Final Turn Analysis: The solo student pilot reported she>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC