R22, R44, and R66 Helicopters Require Tail Rotor Inspection | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Wed, Dec 28, 2022

R22, R44, and R66 Helicopters Require Tail Rotor Inspection

Seaside Operators Particularly Susceptible to Loosening Rotor Tips, Gearbox Failure

Robinson Helicopters from the R22-series saw the issuance of a new service bulletin this week, mandating tail rotor inspection and replacement for affected parts.

The company has “received reports of tail rotor blade tips coming loose due to corrosion at the bond,” finding that helicopters operating near saltwater are particularly susceptible to corrosion, especially when stored outdoors.” A debonded tip can cause severe vibration in flight which can speedily deteriorate into failure of the tail rotor gearbox housing. A different, improved part, A029-2 revision V blades, are equipped with tip caps sporting an alternate alloy to reduce the likelihood of corrosion. Affected parts include tail rotors from serial numbers 11279 and below. Such blades were factory-installed on R22’s from 4873 and prior, and were shipped as spares through October 2022.

For R44s, afflicted serials include 2698 and prior, R44 IIs from 14564 and prior, and R44 Cadets 30087 and prior. All such aircraft used affected tail rotor part number C029-3 REV Q and prior. The replacement, improved part will be C029-3 Rev R/
Applicable serials for R66 aircraft include number 1188 and below, with a handful of exceptions. Tail rotors from part number F029-1 REV F and prior are similarly affected, to be replaced by F029-1. 

Under the bulletin, operators are required to complete the inspections within the next 10 flight hours or by January 15, 2023, whichever comes first. Recurring inspections for Part A are required before the first flight of each day thereafter. Aircraft stationed outdoors in “corrosive environments such as salt water coastlines should replace affected blades as soon as practical,” according to Robinson. They’ve set a date for that replacement - such rotors must be replaced by December 31, 2024. 

FMI: www.robinsonheli.com
 

Advertisement

More News

NTSB Final Report: Rutan Long-EZ

He Attempted To Restart The Engine Three Times. On The Third Restart Attempt, He Noticed That Flames Were Coming Out From The Right Wing Near The Fuel Cap Analysis: The pilot repor>[...]

ANN FAQ: Turn On Post Notifications

Make Sure You NEVER Miss A New Story From Aero-News Network Do you ever feel like you never see posts from a certain person or page on Facebook or Instagram? Here’s how you c>[...]

Classic Aero-TV: ICAS Perspectives - Advice for New Air Show Performers

From 2009 (YouTube Edition): Leading Air Show Performers Give Their Best Advice for Newcomers On December 6th through December 9th, the Paris Las Vegas Hotel hosted over 1,500 air >[...]

ANN's Daily Aero-Linx (06.28.25)

Aero Linx: NASA ASRS ASRS captures confidential reports, analyzes the resulting aviation safety data, and disseminates vital information to the aviation community. The ASRS is an i>[...]

Aero-News: Quote of the Day (06.28.25)

“For our inaugural Pylon Racing Seminar in Roswell, we were thrilled to certify 60 pilots across our six closed-course pylon race classes. Not only did this year’s PRS >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC