AD: Gulfstream Aerospace Corporation Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Wed, Jun 17, 2020

AD: Gulfstream Aerospace Corporation Airplanes

AD 2020-12-06 Prompted By Reports Of Uncommanded Nose Wheel Steering Turns

The FAA is adopting a new airworthiness directive (AD) for all Gulfstream Aerospace Corporation (Gulfstream) Model G-IV airplanes. This AD was prompted by reports of uncommanded nose wheel steering turns.

This AD requires replacing the nose wheel steering servo valve manifold, incorporating revised operating procedures into the airplane flight manual (AFM), doing a records inspection for any incidents of un-commanded nose wheel steering turns, and reporting the results to the FAA. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective July 20, 2020.

SUPPLEMENTARY INFORMATION: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Gulfstream Model G-IV airplanes. The NPRM was published in the Federal Register on December 27, 2019 (84 FR 71333). The NPRM was prompted by reports of uncommanded nose wheel steering turns. An investigation revealed the supplier compromised the seals during assembly of the electro-hydraulic servo valves, which allows moisture to enter the valve.

During cold soak conditions, the moisture forms ice crystals in the servo valve armature air gaps, which may cause the valve armature to displace to a non-neutral position. This condition, if not addressed, could result in an un-commanded nose wheel position once power is applied to the nose wheel servo and subsequent lateral runway departure. To address this condition, the supplier improved their production quality control process to reduce the risk of compromised seals in the nose wheel steering servo valve. Gulfstream also revised the normal, abnormal, and emergency procedures in the AFMs related to nose wheel steering un-commanded turns.

Accordingly, this AD requires replacing the nose wheel steering servo valve manifold, incorporating revised operating procedures into the AFM, doing a records inspection for any incidents of un-commanded nose wheel steering turns, and reporting the results to the FAA. The FAA is issuing this AD to address the unsafe condition on these products.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (05.09.24): Hold Procedure

Hold Procedure A predetermined maneuver which keeps aircraft within a specified airspace while awaiting further clearance from air traffic control. Also used during ground operatio>[...]

ANN's Daily Aero-Term (05.06.24): Altitude Readout

Altitude Readout An aircraft’s altitude, transmitted via the Mode C transponder feature, that is visually displayed in 100-foot increments on a radar scope having readout cap>[...]

ANN's Daily Aero-Linx (05.06.24)

Aero Linx: European Hang Gliding and Paragliding Union (EHPU) The general aim of the EHPU is to promote and protect hang gliding and paragliding in Europe. In order to achieve this>[...]

Airborne-NextGen 05.07.24: AI-Piloted F-16, AgEagle, 1st 2 WorldView Sats

Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]

Aero-News: Quote of the Day (05.07.24)

"The need for innovation at speed and scale is greater than ever. The X-62A VISTA is a crucial platform in our efforts to develop, test and integrate AI, as well as to establish AI>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC