Wed, Apr 29, 2015
Some Avionics Will Not Support Such Fixes, According To SAIB
The FAA publishes RNAV (GPS) instrument approach procedures that have step-down fix waypoints on the final approach segment. Currently, some navigation equipment or aircraft installations cannot properly support step-down fixes on instrument approach procedures. In these cases, AC 20-138D Change 1 section 12-8, permits removing step-down fixes from the aircraft navigation database. Airframe or navigation equipment manufacturers typically have their database supplier remove all step-down fixes from the packed data.
Recently, in the ARINC 424 data supplied by the FAA, some published RNAV (GPS) instrument approaches had waypoints prior to the final approach fix randomly designated as step-down fixes instead of altitude constraints. Although not prohibited by ARINC 424, this designation is contrary to the equipment design requirements. Designating these waypoints as step-down fixes causes their removal from the navigation database for equipment or installations that cannot support step-down fixes.
FAA procedure designers have stopped the practice of designating waypoints prior to the final approach fix as step-down fixes. However, it will take time to correct all the existing procedures.
In a Special Airworthiness Information Bulletin (SAIB), the FAA recommends that airframe and navigation equipment manufacturers with navigation equipment which cannot support step-down fixes change their navigation database supplier instructions for step-down fix removal. Database suppliers should be instructed to delete the ARINC 424 step-down fix designation from the waypoint description field of the terminal procedure sequence coding (i.e., PF Record) and waypoint record (i.e., PC Record). This action helps ensure waypoints prior to the final approach fix are not inadvertently deleted along with step-down fixes on the final approach segment.
More News
With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]
Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]
“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]
"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]
IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]