Wed, Dec 20, 2023
Bulletin Provides Guidance on Finding, Reporting Tampered ARC Documentation
The FAA issues a Special Airworthiness Information Bulletin regarding the possible usage of engine and APU components sourced from AOG Technics, a recently disgraced vendor that had misrepresented its wares.

The FAA issued a handful of recommendations, mostly aimed at determining the presence and validity of any equipment that passed through AOG Technics hands. When identified, the FAA wants operators to ascertain the validity of the parts' accompanying ARC documentation, a piece that was apparently falsified by AOG Technics in their bid to undercut competition. The actual parts reputedly varied in quality, ranging from used and worn but genuine OEM equipment to parts of an apparently unknown pedigree altogether.
"If parts were handled by AOG Technics and are installed on engines or airplanes, confirmation of the validity of the ARC should be sought from the originator of the ARC. "Purported originators of the ARCs should examine any returned ARCs for signs of tampering and falsification. If a form claiming to be issued by you is not your original document and shows signs of tampering and forgery, you should report as soon as possible to the operator requesting verification, your local airworthiness authority, and the airworthiness authority who has granted you authority for issuing ARCs."
If a "forged or tampered ARC is discovered for parts installed in your fleet and a legitimate source for the parts cannot be positively identified and legitimate ARCs obtained," the FAA continued, "operators should develop a plan to remove those parts as soon as reasonably practical in accordance with their Safety Management System (SMS) principles and procedures." The parts can be triaged thereafter, with more critical parts removed with greater timeliness.
Thankfully no critical parts have been found with a forged or tampered ARC...should one be discovered, then the AOG Technics affair could quickly become a lot more costly for all affected. A forged ARC tied to critical parts would make carriers fall afoul of CFR 91.403, meaning each piece would have to be removed from service before further flight.
More News
Homing [ICAO] The procedure of using the direction-finding equipment of one radio station with the emission of another radio station, where at least one of the stations is mobile, >[...]
Aero Linx: European Regions Airline Association (ERA) The European Regions Airline Association (ERA) represents a diverse membership of over 50 airlines and more than 150 associate>[...]
A Few Questions AND Answers To Help You Get MORE Out of ANN! 1) I forgot my password. How do I find it? 1) Easy... click here and give us your e-mail address--we'll send it to you >[...]
While On Short Final, About 300 Ft, The Pilot Performed A Forced Landing Near Trees On September 7, 2025, about 0932 eastern daylight time, a CubCrafters Carbon Cub EX airplane, N4>[...]
Severe Icing The rate of ice accumulation is such that ice protection systems fail to remove the accumulation of ice and ice accumulates in locations not normally prone to icing, s>[...]