SB Requires Inspection or Replacement for 912 i, 915 i, and 916 i Series

On February 3, Rotax issued a new Mandatory Service Bulletin for the 912 i, 915 i, and 916 series engines that requires inspection or replacement of the crankcase and gearbox housing. This is the second surprise obligation for newer 900-series powerplants in less than two months.

Highwing Prototype Slated to Take Flight in April 2025

Sonex Aircraft has officially opened reservations for its highly anticipated Highwing kit, allowing prospective builders to secure their place in line with a $500 deposit. Once the prototype completes its first test flights, reservation holders will have the opportunity to convert their deposits into firm kit orders.

Pilot Had Just Completed The Airplane Build And Was Operating The Airplane As A Test Flight

On June 3, 2023, at 1320 central daylight time, an experimental, amateur-built Zenith 601XL, N601YP, was substantially damaged when it was involved in an accident near Albertville, Alabama. The commercial pilot was fatally injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 flight. Preliminary Automatic Dependent Surveillance - Broadcast (ADS-B) data revealed that the flight departed Albertville Regional Airport-Thomas J Brumlik Field (8A0), Albertville, Alabama at 1220. The airplane departed the airport traffic pattern to the southwest and flew for about 1 hour, performing several heading changes, and a climb to 4,000