AD 2020-26-18 Requires Replacing Each Affected Fillet Fairing Adjustable Rod

The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-243, -343, and -941 airplanes. This AD was prompted by a report that during an inspection of the wing/fuselage fillet interface, evidence of black stains and white oxidation was found on several areas of the fillet fairing adjustable rods due to surface corrosion. This AD requires replacing each affected fillet fairing adjustable rod with a serviceable part, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. This AD becomes effective January 14, 2021.

AD 2020-26-21 Requires A Rotating Probe Test Of All Fastener Holes Located In The Affected Area

The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 airplanes. This AD was prompted by a report that during the assembly of a certain section of the fuselage, the gaps found on self-aligning nuts for eight fasteners were out of tolerance. This AD requires a rotating probe test of all fastener holes located in the affected area for any discrepancies, an eddy current inspection of the surrounding flange for any discrepancies, a detailed inspection of certain frames for any discrepancies, and corrective actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by