NTSB Final Report: Champion 7GC | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-11.03.25

AirborneNextGen-
11.04.25

Airborne-Unlimited-11.05.25

Airborne-Unlimited-11.06.25

AirborneUnlimited-10.17.25

Affordable Flying Expo Tickets (Discount Code: AFE2025): CLICK HERE!
LIVE MOSAIC Town Hall, 1800ET, 11.07.25: www.airborne-live.net

Thu, Nov 06, 2025

NTSB Final Report: Champion 7GC

About 25 Days (9.3 Hours) Before The Accident, The Airframe Was Modified With Different Landing Gear Legs, Wheels, And Brakes

Location: Haskell, Oklahoma Accident Number: CEN26LA002
Date & Time: October 1, 2025, 12:45 Local Registration: N621E
Aircraft: Champion 7GC Aircraft Damage: Substantial
Defining Event: Loss of control on ground Injuries: 1 Minor
Flight Conducted Under: Part 91: General aviation - Personal

Analysis: The pilot reported that during the landing roll on the dry grass strip, he was making corrections with the brakes and the airplane nosed over, coming to rest inverted. The pilot assumed that he was “a bit too aggressive” with the brakes. The airplane sustained substantial damage to the right wing strut and the rudder. The pilot reported there were no preimpact mechanical malfunctions or failures with the airframe or the engine that would have precluded normal operation. The pilot further reported that the accident could have been prevented by “less or no excessive braking” during the landing roll.

About 25 days (9.3 hours) before the accident, the airframe was modified with different landing gear legs, wheels, and brakes. Additionally, tundra tires were installed. The pilot reported that he thought he had become familiar with the recent modifications, but the nose over revealed that he probably wasn’t as familiar with the braking capability of the tundra tires as he thought he was.

According to FAA Advisory Circular Systems and Equipment Guide for Certification of Part 23 Airplanes and Airships 23-17C, tundra tire installations on airplanes may reduce brake effectiveness during a braked landing and may result in an increased tendency to nose over during landing. The Airframes Alaska Installation Instructions and Instructions for Continued Airworthiness for Alaskan Bushwheel Tundra Tires ABI-Tire-ICA discusses post-installation testing and states: Always stay within the aircraft manufacturer’s limits. When your tundra tire installation is complete and inspected, and the brakes are safe, verify the function, ability, and adequacy of the whole system by conducting ground and air practice/comparison test runs at a safe area/altitude at your gross weight. Make note of any operational differences and include these in your flight planning, decision making, and operating techniques.

Probable Cause and Findings: The National Transportation Safety Board determines the probable cause(s) of this accident to be -- The pilot’s excessive braking during the landing roll, which resulted in a nose over. Contributing to the accident was the pilot’s lack of experience with the recently installed brakes and tundra tires.

FMI: www.ntsb.gov

Advertisement

More News

Airborne-NextGen 11.04.25: Anduril YFQ-44A, Merlin SOI 2, UAV Rulemaking Stalled

Also: Horizon Picks P&W PT6A, Army Buys 3 EagleNXT, First Hybrid-Electric Regional, Army Selects AEVEX Anduril Industries’ YFQ-44A Collaborative Combat Aircraft was flown>[...]

NTSB Prelim: Elmore Travis C Searey

While Flying North Along The Beach At About 300 Ft Above Ground Level, The Pilot Reported That The Engine RPM Dropped To About Idle On September 28, 2025, at 1126 eastern daylight >[...]

ANN's Daily Aero-Linx (11.03.25)

Aero Linx: European Association of Aviation Training and Educational Organisations (EATEO) Welcome to the “ European Association of Aviation Training and Education Organizati>[...]

ANN's Daily Aero-Term (11.03.25): On-Course Indication

On-Course Indication An indication on an instrument, which provides the pilot a visual means of determining that the aircraft is located on the centerline of a given navigational t>[...]

Aero-News: Quote of the Day (11.03.25)

“It also gives us the hard data we need to shape requirements, reduce risk, and ensure the CCA program delivers combat capability on a pace and scale that keeps us ahead of t>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC