FreeFlight Systems Introduces FRX-250 Integrated ADS-B | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.19.25

Airborne-NextGen-05.20.25

AirborneUnlimited-05.21.25

Airborne-AffordableFlyers-05.22.25

AirborneUnlimited-05.23.25

Wed, Oct 22, 2014

FreeFlight Systems Introduces FRX-250 Integrated ADS-B

Position Source, FIS-B Receiver For Part 25 Business Aircraft

FreeFlight Systems has introduced the FRX-250 system for Part 25 aircraft, integrating an ADS-B In FIS-B weather data receiver and a certified GPS/GNSS ADS-B position source in a compact unit. When paired with an approved ADS-B transponder the FRX-250 is a highly cost-effective way to add NextGen compliance to Part 25 aircraft.

The FRX-250 combines the FreeFlight Systems certified RANGR ADS-B In receiver and its 1203C WAAS/GPS sensors currently installed in business and commercial transport aircraft worldwide. In U.S. airspace, the ADS-B In receiver enables FIS-B subscription-free NEXRAD and textual weather data for use on existing aircraft displays or wirelessly via FreeFlight’s FWF-125 Serial to Wifi for Personal Electronic Device display.

As a position source approved for all ICAO jurisdictions, the integrated 15-channel GPS/GNSS sensor is the foundation for a range of advanced capabilities for CPDLC, TAWS/FMS and RNP 0.3 operations. It also is part of a fully rule-compliant ADS-B Out system when paired with a compatible ARINC 743A certified transponder.

“The FRX-250 adds multiple, advanced capabilities in an easy-to-install and very cost-effective unit,” said Tim Taylor, CEO of FreeFlight Systems. “It’s also part of a growing line of ADS-B solutions that meet the unique performance, regulatory, installation and cost requirements of Part 25 operators.”

Less than 5 x 9 x 2 inches in size and weighing under 2 lbs, the unit is housed in a sealed, environmentally robust package (ARINC 743A Alternative Mounting Scheme) allowing it to be located either in the aircraft equipment bay or close to antenna locations to minimize cabling costs.

(Image provided by FreeFlight Systems)

FMI: www.freeflightsystems.com

Advertisement

More News

NTSB Prelim: Lee Aviation LLC JA30 SuperStol

A Puff Of Smoke Came Out From The Top Of The Engine Cowling Followed By A Total Loss Of Engine Power On May 9, 2025, about 1020 mountain daylight time, an experimental amateur-buil>[...]

Classic Aero-TV: Curtiss Jenny Build Wows AirVenture Crowds

From 2022 (YouTube Edition): Jenny, I’ve Got Your Number... Among the magnificent antique aircraft on display at EAA’s AirVenture 2022 was a 1918 Curtiss Jenny painstak>[...]

ANN's Daily Aero-Term (05.30.25): Very High Frequency (VHF)

Very High Frequency (VHF) The frequency band between 30 and 300 MHz. Portions of this band, 108 to 118 MHz, are used for certain NAVAIDs; 118 to 136 MHz are used for civil air/grou>[...]

Aero-News: Quote of the Day (05.30.25)

“From approximately November 2021 through January 2022, Britton-Harr, acting on behalf of AeroVanti, entered into lease-purchase agreements for five Piaggio-manufactured airc>[...]

ANN's Daily Aero-Term (05.31.25): Microburst

Microburst A small downburst with outbursts of damaging winds extending 2.5 miles or less. In spite of its small horizontal scale, an intense microburst could induce wind speeds as>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC