NTSB Prelim: Mooney Aircraft Corp. M20K | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-SpecialEpisode-12.15.25

AirborneNextGen-
12.16.25

Airborne-Unlimited-12.10.25

Airborne-AffordableFlyers-12.11.25

AirborneUnlimited-12.12.25

AFE 2025 LIVE MOSAIC Town Hall (Archived): www.airborne-live.net

Sat, Dec 20, 2025

NTSB Prelim: Mooney Aircraft Corp. M20K

The Airplane Experienced A Total Loss Of Engine Power

Location: Foley, AL Accident Number: ERA26LA061
Date & Time: December 3, 2025, 16:00 Local Registration: N57229
Aircraft: Mooney Aircraft Corp. M20K Injuries: 1 Minor
Flight Conducted Under: Part 91: General aviation - Personal

On December 3, 2025, about 1600 central standard time, a Mooney Aircraft Corp. M20K, N57229, was substantially damaged when it was involved in an accident near Foley, Alabama. The pilot sustained minor injuries. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight.

According to the pilot, the flight departed from Holk Field at Foley Municipal Airport (5R4), Foley, Alabama, with 54 gallons of fuel. The pilot flew to the north at an altitude 4,500 ft mean sea level and conducted several practice maneuvers, including steep turns, before returning to the airport about 1 hour later. The pilot switched the fuel selector tank position twice (every 30 minutes) based on his Garmin timer and he switched the fuel selector position a third time on his way back to 5R4. Shortly thereafter, the airplane experienced a total loss of engine power. 

The airplane was too far north to reach the departure airport; the pilot diverted to Bay Minette Municipal Airport (1R8), Bay Minette, Alabama, set best glide speed (80 kts) and attempted to restart the engine by completing the “engine out” checklist. The pilot’s attempts to restore engine power were unsuccessful.

The airplane was unable to glide to 1R8, and the pilot performed an off-field landing to a farm pasture. During landing, the airplane impacted a barbed wire fence, which sheared the landing gear; it then landed on rough terrain where it skidded to a stop. The airplane’s wings were buckled and torn in multiple locations, and there was damage to the wing spar and underside of the fuselage. The two-bladed metal propeller exhibited no rotational damage. 

An FAA inspector recovered an engine data monitor that was sent to the NTSB recorders laboratory for download. The wreckage was retained for further examination.

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Term (12.19.25): Ultrahigh Frequency (UHF)

Ultrahigh Frequency (UHF) The frequency band between 300 and 3,000 MHz. The bank of radio frequencies used for military air/ground voice communications. In some instances this may >[...]

NTSB Prelim: Cirrus Design Corp SR22T

During The 7 Second Descent, There Was Another TAWS Alert At Which Time The Engine Remained At Full Power On October 24, 2025 at 2115 mountain daylight time, a Cirrus SR22T, N740TS>[...]

Classic Aero-TV: The Red Tail Project--Carrying the Torch of the Tuskegee Airmen

From 2009 (YouTube Edition): Educational Organization Aims to Inspire by Sharing Tuskegee Story Founding leader Don Hinz summarized the Red Tail Project’s mission in simple, >[...]

Aero-News: Quote of the Day (12.19.25)

“This feels like an important step since space travel for people with disabilities is still in its very early days... I’m so thankful and hope it inspires a change in m>[...]

Airborne 12.17.25: Skydiver Hooks Tail, Cooper Rotax Mount, NTSB v NDAA

Also: New Katanas, Kern County FD Training, IndiGo’s Botched Roster, MGen. Leavitt Named ERAU Dean The Australian Transportation Safety Bureau (ATSB) has wrapped up its inves>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC