NTSB Prelim: Chip Light Warns Bell 407 Just Before Power Failure | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.21.25

Airborne-Unlimited-07.22.25

AirborneUnlimited-07.23.25

Airborne-Unlimited-07.24.25

AirborneUnlimited-07.25.25

Mon, Dec 19, 2011

NTSB Prelim: Chip Light Warns Bell 407 Just Before Power Failure

Gulf Autorotation Into The Drink Results In No Injuries

There are few more unwelcome incidents in flight, to a help pilot, the glaring 'uh-oh' imposed by an illuminated chip light. In such circumstances, all you can and should do is get on the deck as soon as circumstances permit... before those circumstances are forced.

NTSB Identification: CEN12IA096
Nonscheduled 14 CFR Part 135: Air Taxi & Commuter
Incident occurred Thursday, December 01, 2011 in Gulf Of Mexico, GM
Aircraft: BELL HELICOPTER TEXTRON CANADA 407, registration: N435PH
Injuries: 2 Uninjured.

This is preliminary information, subject to change, and may contain errors. Any errors in this report will be corrected when the final report has been completed.

On December 1, 2011, about 1005 central standard time, a Bell 407 helicopter, N435PH, was successfully autorotated to the water following a loss of engine power while in cruise flight over the Gulf of Mexico. The helicopter was not damaged during the on water landing. The commercial pilot, and sole passenger, were not injured. The helicopter was registered to and operated by PHI, Inc., under the provisions of 14 Code of Federal Regulations Part 135 as a non-scheduled air-taxi flight. Visual meteorological conditions prevailed and a company flight plan had been filed. The flight originated from platform EC278-C, and was en route to platform EC261, both in the Gulf Of Mexico.

According to the pilot, while en route to EC261 the engine chip light illuminated. The flight was abeam platform EC278-B at the time, and the pilot elected to divert for a precautionary landing. While on the base leg to EC278-B, the pilot heard a loud whining noise followed by a loud popping noise and the helicopter began to yaw. The pilot entered an autorotation, called mayday, inflated the floats, and performed a successful water landing. The pilot and passenger were able to exit the helicopter unassisted into a life raft and were picked up within 10 minutes. The helicopter remained upright for approximately 20 minutes before overturning.

The helicopter was recovered for further examination.

FMI: www.ntsb.gov

 


Advertisement

More News

Airborne 07.21.25: Nighthawk!, Hartzell Expands, Deltahawk 350HP!

Also: New Lakeland Fly-in!, Gleim's DPE, MOSAIC! Nearly three-quarters of a century in the making, EAA is excited about the future… especially with the potential of a MOSAIC>[...]

ANN's Daily Aero-Term (07.27.25): Estimated (EST)

Estimated (EST) -When used in NOTAMs “EST” is a contraction that is used by the issuing authority only when the condition is expected to return to service prior to the >[...]

ANN's Daily Aero-Linx (07.27.25)

Aero Linx: Regional Airline Association (RAA) Regional airlines provide critical links connecting communities throughout North America to the national and international air transpo>[...]

NTSB Final Report: Luce Buttercup

The Airplane Broke Up In Flight And Descended To The Ground. The Debris Path Extended For About 1,435 Ft. Analysis: The pilot, who was the owner and builder of the experimental, am>[...]

Classic Aero-TV: 'That's All Brother'-Restoring a True Piece of Military History

From 2015 (YouTube version): History Comes Alive Thanks to A Magnificent CAF Effort The story of the Douglas C-47 named, “That’s all Brother,” is fascinating from>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC