AD: Blanik Aircraft CZ s.r.o. | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.05.25

Airborne-NextGen-05.06.25

AirborneUnlimited-05.07.25

Airborne-Unlimited-05.01.25

AirborneUnlimited-05.02.25

Sun, Aug 16, 2020

AD: Blanik Aircraft CZ s.r.o.

AD 2020-16-05 Requires A One-Time Inspection Of The Rudder Control Cable Attachment Screws And Hinge Bolts

The FAA is adopting a new airworthiness directive (AD) for all Blanik Aircraft CZ s.r.o. Model L 23 Super-Blanik gliders.

This AD requires a one-time inspection of the rudder control cable attachment screws and hinge bolts, replacement of the cable attachment screws and hinge bolts if a crack is found, and reporting the inspection results to the manufacturer. This AD was prompted by reports of cracked rudder cable attachment screws. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective August 28, 2020.

Supplementary Information: The European Union Aviation Safety Agency (EASA), which is the Technical Agent for the Member States of the European Community, has issued EASA AD No. 2020-0068-E, dated March 23, 2020 (referred to after this as “the MCAI”), to address an unsafe condition for Blanik Aircraft CZ s.r.o. Model L 23 Super-Blanik gliders.

The MCAI states:

  • During a standard maintenance procedure on an L 23 Super-Blaník sailplane, a crack was detected on a rudder control cable attachment screw.
  • This condition, if not detected and corrected, could lead to rudder control failure, possibly resulting in loss of directional control of the sailplane.
  • To address this unsafe condition, BACZ [Blanik Aircraft CZ s.r.o.] issued the MB [mandatory bulletin] and the IB [information bulletin] to provide inspection and replacement instructions.
  • For the reasons described above, this [EASA] AD requires a one-time inspection and, depending on findings, replacement of affected parts.

Blanik Aircraft CZ s.r.o. advises that reporting by operators and maintenance facilities indicates that this issue is not an isolated event.

FMI: www.regulations.gov

Advertisement

More News

NTSB Final Report: Cessna 177B

Outboard Section Of The Right Wing And The Right Flap Separated In Flight And The Airplane Impacted A Farm Field Analysis: The pilot was approaching his destination airport under i>[...]

ANN's Daily Aero-Term (05.08.25): Final Approach Fix

Final Approach Fix The fix from which the final approach (IFR) to an airport is executed and which identifies the beginning of the final approach segment. It is designated on Gover>[...]

Aero-News: Quote of the Day (05.08.25)

"Our choice of when to respond, how to respond and on which targets to respond is a consideration that we make every time... Netanyahu also noted that anyone attacking Israel &ldqu>[...]

ANN's Daily Aero-Term (05.09.25): Estimated (EST)

Estimated (EST) When used in NOTAMs “EST” is a contraction that is used by the issuing authority only when the condition is expected to return to service prior to the e>[...]

ANN's Daily Aero-Linx (05.09.25)

Aero Linx: Coalition of Airline Pilots Associations (CAPA) The Coalition of Airline Pilots Associations (CAPA) is the world’s largest pilot trade association representing ove>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC