AD NUMBER: 2005-10-24
MANUFACTURER: AeroSpace Technologies of Australia Pty Ltd.
SUBJECT: Airworthiness Directive 2005-10-24
SUMMARY: The FAA adopts a new airworthiness directive (AD) to supersede AD 2003-14-20, which applies to all AeroSpace Technologies of Australia Pty Ltd. (ASTA) Models N22B and N24A airplanes. AD 2003-14-20 requires you to repetitively inspect, using either dye penetrant or magnetic particle methods, the rudder control lever shafts for cracks; inspect (one-time) all lever shaft sideplates by measuring the thickness; and if cracks or discrepancies in thickness are found, replace unserviceable parts with new or serviceable parts. Since AD 2003-14-20 was issued, we determined that the AD should also affect Model N22S airplanes. The manufacturer has also revised the service information to include a rudder control lever shaft part number (P/N) that was not part of AD 2003-14-20. Consequently, this AD retains the actions of AD 2003-14-20, adds Model N22S airplanes to the applicability, and adds rudder control lever shaft P/N 1/N-45-1102 tothe inspection requirements. We are issuing this AD to detect and correct cracks in the rudder control lever torque shafts and discrepancies in the thickness of the lever shaft side plates, which could result in failure of the rudder control lever torque shaft. Such failure could lead to reduced controllability of the airplane.

FMI: www.avantext.com/DailyADIndex.ASP?AD=20051024