Vans RV-14 Surprised Crowds At Oshkosh | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.10.24

Airborne-NextGen-06.11.24

Airborne-Unlimited-06.12.24 Airborne-FltTraining-06.13.24

Airborne-Unlimited-06.14.24

Fri, Aug 10, 2012

Vans RV-14 Surprised Crowds At Oshkosh

RV-FOURTEEN? Where did that come from? 

Something of a “stealth” project, the RV-14 made its inaugural public appearance at AirVenture a couple of weeks ago. but by the time the public got its first look at the new kit-built plane, it had already completed a comprehensive test program. The RV-14 is an aerobatic two-seat side-by-side airplane with a 46” wide cabin and a 27’ span. The wing uses the RV-10 airfoil and slotted flaps. A new cowling surrounds a Lycoming IO-390 producing 210 hp, but will accept the 200 hp IO-360. (There is NO option for a six cylinder engine.)  Fifty gallons of fuel is housed in two 25 gallon leading edge tanks. Tall seating and low canopy rails result in superb visibility – even better than previous RVs.  A tip-up canopy (the only canopy available) incorporates a slick hydraulic-strut assist and quick-release mechanism that makes it fit perfectly and open/close like a bank vault. A large baggage compartment behind seats can hold up to 100 lbs. The airplane rides on a new leaf spring main gear.

Vans said that the goal was to meet or exceed the performance of a 180 hp/constant-speed RV-7 in an airplane with better comfort, better visibility, longer range and more payload.

Like all other RVs, the RV-14 is built of riveted aluminum. However, the kit incorporates everything Van’s has learned in forty years, so building times should be substantially less than previous kits. All metal parts are completely formed and pre-punched -- even the main longerons. Rivet holes are punched full-size and main spars are assembled at the factory. The canopy bubble will come pre-trimmed. The plans/manual are combined in the style that works so well on RV-10 and RV-12. Complete wiring kits and avionics packages are designed and will be offered as options. A tailwheel RV-14 is in the works.

Wing kits should be available in September. After that, other airframe kits will be released at regular intervals until the complete airplane is available. After its Oshkosh debut, the RV-14 has joined the “demo fleet” at the Van’s Aircraft, Inc. factory in Aurora, Oregon.

FMI: www.vansaircraft.com

Advertisement

More News

ANN FAQ: Submit a News Story!

Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]

Aero-News: Quote of the Day (06.12.24)

“The legislation now includes a task force with industry representation ensuring that we have a seat at the table and our voice will be heard as conversations about the futur>[...]

ANN's Daily Aero-Linx (06.12.24)

Aero Linx: Waco Museum The WACO Historical Society, in addition to preserving aviation's past, is also dedicated and actively works to nurture aviation's future through its Learnin>[...]

ANN's Daily Aero-Term (06.12.24): Adcock Range

Adcock Range National low-frequency radio navigation system (c.1930-c.1950) replaced by an omnirange (VOR) system. It consisted of four segmented quadrants broadcasting Morse Code >[...]

Airborne Affordable Flyers 06.06.24: 200th ALTO, Rotax SB, Risen 916iSV

Also: uAvionix AV-Link, Does Simming Make Better Pilots?, World Games, AMA National Fun Fly Czech sportplane manufacturer Direct Fly has finished delivering its 200th ALTO NG, the >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC