Thu, Jul 27, 2017
Digital Flight Control System With Envelope Protection For High-Performance Turboprops And Jet Aircraft
Genesys Aerosystems has submitted Technical Standard Order (TSO) documentation to the FAA for its new S-TEC 5000 Digital Flight Control System (DFCS).
“We are extremely excited and proud to announce that our diligent pursuit of our new-generation S-TEC 5000 Digital Flight Control System developed to meet the demanding needs of FAA Part 25 high-performance turboprop and turbojet aircraft is available to the market,” said Jamie Luster, Genesys Aerosystems Director of Sales and Marketing. “The S-TEC 5000 not only represents the latest advancement in our long line of analog and digital autopilots, but it also ushers in a new generation of digital flight control systems that will feature the most advanced capability- and safety-enhancing software and hardware available.
“For example, the S-TEC 5000 DFCS will be the first aftermarket autopilot available for Part 25 aircraft to feature digital Envelope Protection and Straight and Level Recovery capabilities,” she said. “We’ve talked to a lot of pilots and it’s clear that these types of features are regarded as ‘must haves’ for this category of aircraft – especially in higher-workload, single-pilot applications.”
In addition to Envelope Protection and Straight and Level Recovery, the new-generation S-TEC 5000 three-axis, Digital Flight Control System features:
- Level “A” DO178B Software
- DO160G Hardware and TSO-C198
- Full Reduced Vertical Separation Minimum (RVSM) compatibility
- Built-in autopilot, flight director and yaw damper controls
- Yaw control includes coordinated turns
- Flight Director capability can drive pitch and roll flight director bars together with mode annunciations on compatible displays
- Lateral and vertical navigation functions including GPSL, GPSV, GPSS, VOR, LOC, GS
- Vertical navigation targets set on the bezel or compatible EFIS
- Heading Hold
- Altitude Preselect and Hold with Autotrim
- Vertical Speed Control
- Indicated Airspeed Control
- Under Speed and Over Speed Warnings
- Roll Envelope Exceedance Warning
- All Axis Trim Control
- Course Intercept capability
- Dual Mode – HDG/NAV and HDG/APR
- Control Wheel Steering
- GPS Steering (GPSS) Mode
- Voice Annunciations
- System can be integrated with approved legacy analog and digital avionics systems
- And more such as go around mode, take off go around, and half bank turn
(Source: Genesys Aerosystems media release)
More News
Circle To Runway (Runway Number) Used by ATC to inform the pilot that he/she must circle to land because the runway in use is other than the runway aligned with the instrument appr>[...]
Aero Linx: National Aviation Safety Foundation (NASF) The National Aviation Safety Foundation is a support group whose objective is to enhance aviation safety through educational p>[...]
At Altitude Of About 250-300 Ft Agl, The Airplane Experienced A Total Loss Of Engine Power On November 6, 2024, at 1600 central standard time, a De Havilland DHC-1, N420TD, was inv>[...]
From 2009 (YouTube Edition): Three Hour Flight Was 'Flawless' -- At Least, Until Mother Nature Intervened For anyone who loves the aviation business, this was a VERY good day. Afte>[...]
Also: AMA Names Tyler Dobbs, More Falcon 9 Ops, Firefly Launch Unsuccessful, Autonomous F-16s The Air Force has begun ground testing a future uncrewed jet design in a milestone tow>[...]
ANN's Daily Aero-Term (05.05.25): Circle To Runway (Runway Number)
See All