AD: Honeywell International Inc. Turbofan Engines | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Sun, Sep 20, 2020

AD: Honeywell International Inc. Turbofan Engines

AD 2020-18-09 Prompted By A Report Of An Engine Experiencing An Uncontained Release Of LPT Blades

The FAA is adopting a new airworthiness directive (AD) for all Honeywell International Inc. (Honeywell) ALF502L, ALF502L-2, ALF502L-2A, ALF502L-2C, ALF502L-3, ALF502R-3, ALF502R-3A, ALF502R-4, ALF502R-5, ALF502R-6, LF507-1F, and LF507-1H model turbofan engines.

This AD was prompted by a report of an engine experiencing an uncontained release of low-pressure turbine (LPT) blades. This AD requires initial and repetitive visual inspections of the overspeed fuel solenoid valve assembly and the fuel filter outlet. Depending on the results of these inspections, the AD may require inspection of the adjacent fuel system tube assemblies as well as replacement or overhaul of the overspeed fuel solenoid valve assembly. This AD also requires periodic overhaul of the overspeed fuel solenoid valve assembly. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective October 21, 2020.

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Honeywell ALF502L, ALF502L-2, ALF502L-2A, ALF502L-2C, ALF502L-3, ALF502R-3, ALF502R-3A, ALF502R-4, ALF502R-5, ALF502R-6, LF507-1F, and LF507-1H model turbofan engines. The NPRM published in the  Federal Register on May 4, 2020 (85 FR 26375). The NPRM was prompted by a report of an engine experiencing an uncontained release of LPT blades. The NPRM proposed to require initial and repetitive visual inspections of the overspeed fuel solenoid valve assembly and the fuel filter outlet. Depending on the results of these inspections, the NPRM proposed to require inspection of the adjacent fuel system tube assemblies as well as replacement or overhaul of the overspeed fuel solenoid valve assembly. The NPRM also proposed to require periodic overhaul of the overspeed fuel solenoid valve assembly. The FAA is issuing this AD to address the unsafe condition on these products.

FMI: www.regulations.gov

Advertisement

More News

NTSB Final Report: Rutan Long-EZ

He Attempted To Restart The Engine Three Times. On The Third Restart Attempt, He Noticed That Flames Were Coming Out From The Right Wing Near The Fuel Cap Analysis: The pilot repor>[...]

ANN FAQ: Turn On Post Notifications

Make Sure You NEVER Miss A New Story From Aero-News Network Do you ever feel like you never see posts from a certain person or page on Facebook or Instagram? Here’s how you c>[...]

Classic Aero-TV: ICAS Perspectives - Advice for New Air Show Performers

From 2009 (YouTube Edition): Leading Air Show Performers Give Their Best Advice for Newcomers On December 6th through December 9th, the Paris Las Vegas Hotel hosted over 1,500 air >[...]

ANN's Daily Aero-Linx (06.28.25)

Aero Linx: NASA ASRS ASRS captures confidential reports, analyzes the resulting aviation safety data, and disseminates vital information to the aviation community. The ASRS is an i>[...]

Aero-News: Quote of the Day (06.28.25)

“For our inaugural Pylon Racing Seminar in Roswell, we were thrilled to certify 60 pilots across our six closed-course pylon race classes. Not only did this year’s PRS >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC