AD: Honeywell International Inc. Turbofan Engines | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.05.25

Airborne-NextGen-05.06.25

AirborneUnlimited-05.07.25

Airborne-Unlimited-05.01.25

AirborneUnlimited-05.02.25

Sun, Sep 20, 2020

AD: Honeywell International Inc. Turbofan Engines

AD 2020-18-09 Prompted By A Report Of An Engine Experiencing An Uncontained Release Of LPT Blades

The FAA is adopting a new airworthiness directive (AD) for all Honeywell International Inc. (Honeywell) ALF502L, ALF502L-2, ALF502L-2A, ALF502L-2C, ALF502L-3, ALF502R-3, ALF502R-3A, ALF502R-4, ALF502R-5, ALF502R-6, LF507-1F, and LF507-1H model turbofan engines.

This AD was prompted by a report of an engine experiencing an uncontained release of low-pressure turbine (LPT) blades. This AD requires initial and repetitive visual inspections of the overspeed fuel solenoid valve assembly and the fuel filter outlet. Depending on the results of these inspections, the AD may require inspection of the adjacent fuel system tube assemblies as well as replacement or overhaul of the overspeed fuel solenoid valve assembly. This AD also requires periodic overhaul of the overspeed fuel solenoid valve assembly. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective October 21, 2020.

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Honeywell ALF502L, ALF502L-2, ALF502L-2A, ALF502L-2C, ALF502L-3, ALF502R-3, ALF502R-3A, ALF502R-4, ALF502R-5, ALF502R-6, LF507-1F, and LF507-1H model turbofan engines. The NPRM published in the  Federal Register on May 4, 2020 (85 FR 26375). The NPRM was prompted by a report of an engine experiencing an uncontained release of LPT blades. The NPRM proposed to require initial and repetitive visual inspections of the overspeed fuel solenoid valve assembly and the fuel filter outlet. Depending on the results of these inspections, the NPRM proposed to require inspection of the adjacent fuel system tube assemblies as well as replacement or overhaul of the overspeed fuel solenoid valve assembly. The NPRM also proposed to require periodic overhaul of the overspeed fuel solenoid valve assembly. The FAA is issuing this AD to address the unsafe condition on these products.

FMI: www.regulations.gov

Advertisement

More News

NTSB Final Report: Cessna 177B

Outboard Section Of The Right Wing And The Right Flap Separated In Flight And The Airplane Impacted A Farm Field Analysis: The pilot was approaching his destination airport under i>[...]

ANN's Daily Aero-Term (05.08.25): Final Approach Fix

Final Approach Fix The fix from which the final approach (IFR) to an airport is executed and which identifies the beginning of the final approach segment. It is designated on Gover>[...]

Aero-News: Quote of the Day (05.08.25)

"Our choice of when to respond, how to respond and on which targets to respond is a consideration that we make every time... Netanyahu also noted that anyone attacking Israel &ldqu>[...]

ANN's Daily Aero-Term (05.09.25): Estimated (EST)

Estimated (EST) When used in NOTAMs “EST” is a contraction that is used by the issuing authority only when the condition is expected to return to service prior to the e>[...]

ANN's Daily Aero-Linx (05.09.25)

Aero Linx: Coalition of Airline Pilots Associations (CAPA) The Coalition of Airline Pilots Associations (CAPA) is the world’s largest pilot trade association representing ove>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC