Fri, Feb 22, 2013
Will Power Bombardier CSeries Aircraft
Transport Canada has granted type certification to Pratt & Whitney for its first PurePower Geared Turbofan engine – the PW1500G engine that will power Bombardier's CSeries aircraft. Pratt & Whitney has conducted over 4,000 hours of rigorous engine testing since the initial engine began testing in September 2010. The PW1500G engine test program included 340 hours of flight testing on P&W's experimental 747 Flight Test airplane.
"Certification of the PW1500G engine is a significant milestone and a critical step in supporting the progressive transfer of the first CSeries flight test vehicle to the flight test program," said Rob Dewar, vice president and general manager, CSeries, Bombardier Commercial Aircraft. "We are very pleased with the engine's performance and the overall, steady progress of the CSeries aircraft program. We have met a number of key milestones over the last few months, accepted the first pair of PW1500G propulsion systems and are in the process of completing final assembly of the first CSeries flight test aircraft."
"We have successfully demonstrated the durability and game-changing performance of our Geared Turbofan engine architecture," said Bob Saia, vice president, Next Generation Product Family, Pratt & Whitney. "To date we have conducted over 9,000 hours of testing on our Fan Drive Gear System, demonstrating the service readiness of our gearbox. We have also validated the improvement in fuel efficiency and noise reduction that we targeted in 2007, when we launched the PurePower PW1500G program."
The PW1500G engines were type certified through Transport Canada by Pratt & Whitney Canada and are assembled at Pratt & Whitney Canada's Mirabel Aerospace Centre in Mirabel, Quebec. UTC Aerospace Systems, formed after UTC's acquisition of Goodrich, provides the nacelle system.
Each CSeries aircraft is powered by two PurePower PW1500G series engines. The PurePower PW1500G engine uses an advanced gear system, allowing the engine's fan to operate at a different speed than the low-pressure compressor and turbine. The combination of the gear system and an all-new advanced core deliver double-digit improvements in fuel efficiency, environmental emissions and noise.
More News
Option Approach An approach requested and conducted by a pilot which will result in either a touch-and-go, missed approach, low approach, stop-and-go, or full stop landing. Pilots >[...]
"Emirates is already the world's largest Boeing 777 operator, and we are expanding our commitment to the program today with additional orders for 65 Boeing 777-9s. This is a long-t>[...]
(Pilot) Reported That There Was A Sudden And Violent Vibration Throughout The Airplane That Lasted Several Seconds Analysis: The pilot was returning to his home airport at an altit>[...]
“This recognition was evident during the TBMOPA Annual Convention, where owners and operators clearly expressed their satisfaction with our focus on customer service, and enc>[...]
Overhead Maneuver A series of predetermined maneuvers prescribed for aircraft (often in formation) for entry into the visual flight rules (VFR) traffic pattern and to proceed to a >[...]
ANN's Daily Aero-Term (11.19.25): Option Approach
See All