Jim Bede Announces BD-18 Two Seater | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-11.24.25

AirborneNextGen-
11.18.25

Airborne-Unlimited-11.19.25

Airborne-AffordableFlyers-11.20.25

AirborneUnlimited-11.21.25

LIVE MOSAIC Town Hall (Archived): www.airborne-live.net

Thu, Jul 31, 2003

Jim Bede Announces BD-18 Two Seater

ANN Exclusive! Two seat BD-17 is a natural evolution of the design

By ANN Correspondent Juan Jimenez

It's happened again - Jim Bede has announced a new aircraft design, this time the BD-18, a two-seat version of the BD-17. Not surprisingly, it looks like what the BD-17 suggests itself to be - a very close cousin to the BD-1, which went on to become the AA-1 Yankee, and which in years past evolved into the AA-1B Grumman Trainer, AA-1C Lynx and AA-5 Traveler, among others.

What this reporter did not expect, though, was that the BD-18 would be a side-by-side two-seater. Some months ago ANN had discussed the possibility of a larger BD-17, and there was some mention of a tandem seating design. However, the BD-18 makes sense - a tandem design means having to recalculate and redesign for a redistribution in weight, Going from one seat to side-by-side seating, though, means figuring out how to handle additional weight at roughly the same station.

The truly surprising aspect of the BD-18, however, is that it is designed to be built both as a kit and as a plans-built aircraft, from scratch. As with the BD-17 - as well as some of Bede's previous designs - the BD-18's entire fuselage is built from one-half inch thick honeycomb panel made of 0.020 2024-T3 sheets bonded to a metal honeycomb core with a one-quarter inch cell size. According to Bede, the panels have the strength of a 0.040 2024-T3 sheet in tension, 80 percent of the strength of a solid one-half inch plate in torsion, but weight only 0.75 lbs per square foot.

This honeycomb panel material can also absorb a large amount of impact energy, giving the structure an above average crash-worthiness. As if that were not enough, the panels float.

Specifications for the aircraft are available on Jim's web site listed below, but some of the highlights are estimated cruising speeds of between 142 and 196 mph depending on the choice of engine and propeller, and dirty stall speeds of between 52 and 61 mph. This is definitely not an aircraft designed to qualify for the new Sport Pilot program,

FMI: www.jimbede.com

Advertisement

More News

Airborne 11.24.25: ANN's 30th!, Starship’s V3 Booster Boom, Earhart Records

Also: 1st-Ever Space Crime Was a Fraud, IAE Buys Diamonds, Kennon Bows Out, Perseverance Rover An interesting moment came about this past Sunday as ANN CEO, Jim Campbell, noted tha>[...]

ANN FAQ: Submit a News Story!

Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]

Classic Aero-TV: DeltaHawk Aero Engine Defies Convention

From 2023 (YouTube Edition): Deviation from the Historical Mean Racine, Wisconsin-based DeltaHawk is a privately-held manufacturer of reciprocating engines for aircraft and hybrid >[...]

NTSB Final Report: Glasair GlaStar

Smoke Began Entering The Cockpit During The Landing Flare, And Then The Pilot Noticed Flames On The Right Side Of The Airplane Analysis: The pilot reported that about 30 minutes in>[...]

ANN's Daily Aero-Term (11.22.25): Remote Communications Outlet (RCO)

Remote Communications Outlet (RCO) An unmanned communications facility remotely controlled by air traffic personnel. RCOs serve FSSs. Remote Transmitter/Receivers (RTR) serve termi>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC