NTSB Final Report: Hughes 269A | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-08.25.25

Airborne-NextGen-08.26.25

AirborneUnlimited-08.27.25

Airborne-AffordableFlyers-08.28.25

AirborneUnlimited-08.22.25

Wed, Dec 13, 2023

NTSB Final Report: Hughes 269A

Prior To The Accident Flight, The Pilot Reported Experiencing Vibrations In The Helicopter

Location: Anderson, South Carolina Accident Number: ERA23LA289
Date & Time: June 27, 2023, 17:30 Local Registration: N90270
Aircraft: Hughes 269A Aircraft Damage: Substantial
Defining Event: Ground resonance Injuries: 1 None
Flight Conducted Under: Part 91: General aviation - Flight test

Analysis: Prior to the accident flight, the pilot reported experiencing vibrations in the helicopter. The pilot (who was also a mechanic) and another mechanic adjusted the main rotor dampers to address the issue. Following this adjustment, a 10-minute ground run was performed without any observed problems. The pilot then conducted a test flight during, which no issues were detected. Upon landing and while reducing the rotor rpm, the helicopter began to shake violently. The pilot attempted to perform the ground resonance recovery procedure and climbed the helicopter, but the vibration worsened, and he subsequently landed. After contacting the ground, the helicopter shook and spun uncontrollably before coming to a stop. The airframe and main rotor were substantially damaged during the accident sequence.

Federal Aviation Administration inspectors examined the helicopter after the accident and found that the yellow main rotor blade’s damper had significantly higher torque than the red and blue blades, and that none of the dampers were torqued to the specification in the helicopter’s maintenance manual. The manual also described that incorrect torque adjustments of the dampers could result in “…conditions that may result in ground resonance and destruction of the helicopter. During a subsequent discussion with the assisting mechanic, he stated that he, “may have unintentionally over-torqued the blade [damper].” Based on this information, it is likely that the mechanics’ improper maintenance of the helicopter’s main rotor dampers resulted in the ground resonance event experienced at the conclusion of the post maintenance test flight test flight.

Probable Cause and Findings: The National Transportation Safety Board determines the probable cause(s) of this accident to be -- The mechanics’ improper torquing of the main rotor blade dampers, which resulted in a ground resonance event during landing. 

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Linx (08.27.25)

Aero Linx: The American Society of Aerospace Medicine Specialists (ASAMS) The Society is a non-profit organization created to serve as a voice for and represent the professional ne>[...]

ANN's Daily Aero-Term (08.27.25): Class C Service

Class C Service This service provides, in addition to basic radar service, approved separation between IFR and VFR aircraft, and sequencing of VFR aircraft, and sequencing of VFR a>[...]

ANN FAQ: Submit a News Story!

Have A Story That NEEDS To Be Featured On Aero-News? Here’s How To Submit A Story To Our Team Some of the greatest new stories ANN has ever covered have been submitted by our>[...]

Airborne-NextGen 08.26.25: Iran UAV Knockoffs, X-37B Spaceplane, Army Training

Also: ERAU Uses UAVs, P550 Group 2 UAS, Starship’s Florida Launches, NASA Missions Chopped The Air Force has put out a call to commission a one-to-one copy of the Iranian-des>[...]

Classic Klyde Morris (08.25.25)

Classic Klyde Morris From 11.07.16 (and Remembering Bob...) FMI: www.klydemorris.com>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC