AD: Airbus Helicopters | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.10.24

Airborne-NextGen-06.11.24

Airborne-Unlimited-06.12.24 Airborne-FltTraining-06.13.24

Airborne-Unlimited-06.14.24

Fri, Jun 04, 2021

AD: Airbus Helicopters

AD 2021-10-25 Requires Cleaning Affected Parts, Visual And Dye Penetrant Inspections For Cracks Of Affected Parts

The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Model EC130B4 and EC130T2 helicopters.

This AD was prompted by a report of cracks and geometrical non-conformities of the tail rotor blades (TRBs); all cracks initiated in the drain hole area at the blade root section. This AD requires cleaning affected parts, visual and dye penetrant inspections for cracks of affected parts, a dimensional inspection to verify conformity of affected parts, and corrective actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective July 6, 2021.

Supplementary Information: The EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2020-0187, dated August 21, 2020 (EASA AD 2020-0187) (also referred to as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for all Airbus Helicopters Model EC130B4 and EC130T2 helicopters.

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Airbus Helicopters Model EC130B4 and EC130T2 helicopters. The NPRM published in the Federal Register on March 15, 2021 (86 [[Page 29177]] FR 14290). The NPRM was prompted by a report of cracks and geometrical non-conformities of the TRBs; all cracks initiated in the drain hole area at the blade root section. The NPRM proposed to require cleaning affected parts, visual and dye penetrant inspections for cracks of affected parts, a dimensional inspection to verify conformity of affected parts, and corrective actions if necessary, as specified in an EASA AD.

The FAA is issuing this AD to address geometrical non-conformities of the TRBs, which could lead to crack initiation and consequent blade failure, and possible loss of control of the helicopter. See the MCAI for additional background information

FMI: www.regulations.gov

Advertisement

More News

ANNouncement: Now Accepting Applications For Oshkosh 2024 Stringers!!!

An Amazing Experience Awaits The Chosen Few... Oshkosh, to us, seems the perfect place to get started on watching aviation recover the past couple of years... and so ANN is putting>[...]

Aero-News: Quote of the Day (06.13.24)

“NBAA has a tremendous responsibility to the business aviation industry, and we are constantly collaborating with them. Our flight departments, professionals and aircraft own>[...]

ANN's Daily Aero-Term (06.13.24): Dead Reckoning

Dead Reckoning Dead reckoning, as applied to flying, is the navigation of an airplane solely by means of computations based on airspeed, course, heading, wind direction, and speed,>[...]

ANN's Daily Aero-Linx (06.13.24)

Aero Linx: Vertical Aviation Safety Team (VAST) We are a public–private initiative to enhance worldwide flight operations safety in all segments of the vertical flight indust>[...]

ANN FAQ: How Do I Become A News Spy?

We're Everywhere... Thanks To You! Even with the vast resources and incredibly far-reaching scope of the Aero-News Network, every now and then a story that should be reported on sl>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC