FAA Issues SAIB For Boeing Airliners | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.07.25

Airborne-NextGen-07.08.25

AirborneUnlimited-07.09.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Wed, Apr 19, 2017

FAA Issues SAIB For Boeing Airliners

Changing Procedures For Detecting Corrosion In Aft Fuselage Structure

The FAA has issued a Special Airworthiness Information Bulletin (SAIB) concerning procedural changes for detecting corrosion damage to the aft fuselage structure in the area of the vacuum waste tanks on Boeing 737, 747, 757, 767 and 777 airplanes.

The FAA has received numerous reports of corrosion damage to the aft fuselage structure in the area of the vacuum waste tanks on Model 777 airplanes. This corrosion has been attributed to insufficient clean up and neutralization of leakage and spillage from the vacuum waste system. These reports document that an initial finding of corrosion damage is often followed within the year by corrosion found in close proximity. 

The waste material from a vacuum waste system spill or leak is acidic and corrosive to the airplane structure, such as skin, stringers, and frames. The waste material erodes the corrosion inhibiting compound and the protective finishes, which causes areas of bare structure that are more susceptible to corrosion. 

While the reports of corrosion have been limited to Model 777 airplanes, Boeing believes the Model 737, 747, 757, and 767 airplanes are subject to the same issue. To minimize and address this corrosion, Boeing is revising the related aircraft maintenance manuals (AMMs) and structural repair manuals (SRMs), as listed in Table 1 of this SAIB. The revisions include adding procedures for neutralizing vacuum waste; defining the correct procedures for containing, cleaning, and neutralizing vacuum waste; and adding procedures for the inspection for and removal of corrosion, and re-application of protective coatings. 

The FAA recommends that all owners and operators of the affected airplanes incorporate the revised AMM and SRM procedures when they become available.

(Source: FAA)

FMI: SAIB

Advertisement

More News

KidVenture Educational Activities Lineup At EAA AirVenture 2025

Youth Explore With Hands-On Builds, RC Airplanes, Flight Sims, Much More KidVenture is located just north of the EAA Aviation Museum, at Pioneer Airport, and has arranged a myriad >[...]

Aero-News: Quote of the Day (07.07.25)

“About nine decades ago, Amelia Earhart was recruited to Purdue, and the university president later worked with her to prepare an aircraft for her historic flight around the >[...]

Airborne 07.07.25: Sully v Bedford, RAF Vandalism, Discovery Moving?

Also: New Amelia Search, B737 Flap Falls Off, SUN ‘n FUN Unveiling, F-16 Record Captain Sully Sullenberger, the pilot who saved 155 people by safely landing an A320 in the Hu>[...]

Aero-News: Quote of the Day (07.08.25)

"It is critically important for North American flight safety that Temporary Flight Restriction (TFR) violations are avoided. All pilots must familiarize themselves with updates to >[...]

Airborne-NextGen 07.08.25: Joby in Dubai, Army Electra, Archer iin Abu Dhabi

Also: Hackers v Aviation, Discovery Moving?, Gogo Galileo HDX, EVE to Costa Rica Joby Aviation announced its electric air taxi successfully completed a series of VTOL wingborne tri>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC