AD: Honda Aircraft Company LLC Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.09.25

Airborne-NextGen-06.10.25

AirborneUnlimited-06.11.25

Airborne-AffordableFlyers-06.12.25

AirborneUnlimited-06.06.25

Sun, Mar 20, 2022

AD: Honda Aircraft Company LLC Airplanes

AD 2022-05-13 Prompted By A Report Of In-Flight Smoke And Fire That Initiated From The Windshield Heat Power Wire Braid

The FAA is adopting a new airworthiness directive (AD) for certain Honda Aircraft Company LLC (Honda) Model HA-420 airplanes.

This AD was prompted by a report of in-flight smoke and fire that initiated from the windshield heat power wire braid. This AD requires incorporating temporary revisions into the airplane flight manual (AFM) and the quick reference handbook (QRH) that modify procedures for windshield heat operation until the affected windshield assemblies are replaced. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective April 18, 2022. 

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain serial-numbered Honda Model HA-420 airplanes. The NPRM published in the Federal Register on September 30, 2021 (86 FR 54126). The NPRM was prompted by a report of in-flight smoke and fire that initiated from the windshield heat power wire braid on a Honda Model HA-420 airplane.

An investigation identified that certain Honda Model HA-420 airplanes could have a severed windshield heat power wire braid from installation of the windshield heat wiring during manufacture. The severed windshield heat power wire braid could cause arcing that ignites the wire sheathing and sealant and the windshield acrylic. This condition, if not addressed, could lead to cockpit smoke and fire. In the NPRM, the FAA proposed to require incorporating temporary revisions into the AFM and the QRH that modify procedures for windshield heat operation until the affected windshield assemblies are replaced. The FAA is issuing this AD to address the unsafe condition on these products.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Linx (06.13.25)

Aero Linx: Swift Museum Foundation The Swift Museum Foundation was started by Charlie Nelson, our President, over 40 years ago with an ad in Trade-A-Plane to Swift owners inquiring>[...]

ANN's Daily Aero-Term (06.13.25): Helipad

Helipad A small, designated area, usually with a prepared surface, on a heliport, airport, landing/takeoff area, apron/ramp, or movement area used for takeoff, landing, or parking >[...]

Aero-News: Quote of the Day (06.13.25)

“Aging components – particularly in critical engine assemblies – can experience metal fatigue, corrosion, and rubber degradation that are invisible during externa>[...]

ANN's Daily Aero-Term (06.14.25): Inner-approach OFZ

Inner-approach OFZ The inner-approach OFZ is a defined volume of airspace centered on the approach area. The inner-approach OFZ applies only to runways with an approach lighting sy>[...]

ANN's Daily Aero-Linx (06.14.25)

Aero Linx: Brodhead Pietenpol Association The Brodhead Pietenpol Association is a newly reorganized (in 2017) non-profit educational corporation that grew and developed from an ear>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC