First F-35 Nearing Completion | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.23.25

Airborne-NextGen-06.24.25

AirborneUnlimited-06.25.25

Airborne-AffordableFlyers-06.26.25

AirborneUnlimited-06.27.25

Wed, Dec 21, 2005

First F-35 Nearing Completion

Main Structure Completed; Next Up, Engines

With the installation of horizontal tails on the first F-35, the Lockheed Martin Joint Strike Fighter (JSF) team has completed assembly of the aircraft's major structural components. The next milestone in the aircraft's march to first flight is engine installation, planned for early 2006, with the jet's first flight expected in Fall 2006.

The stealthy F-35 is a supersonic, multi-role, 5th generation fighter designed to replace a wide range of other military aircraft, including aging AV-8B Harriers, A-10s, F-16s, F/A-18 Hornets and United Kingdom Harrier GR.7s and Sea Harriers.

"The speed and precision of assembly on this airplane continues to impress even the most experienced aerospace veterans among us and far exceeds any program that has gone before it," said Dan Crowley, Lockheed Martin executive vice president and F-35 JSF program general manager. "The ease with which this aircraft has come together, along with the quality of the fit and finish, is simply unprecedented in a first-off-the-line aircraft. It puts us down the path toward meeting our affordability goals."

The horizontal stabs installed on December 8, as well as the vertical tails installed in November, were designed and manufactured by BAE Systems in Samlesbury, England. Assemblers installed the aircraft's weapons-bay doors on Dec. 7. Final assembly began in May, when workers mated the Northrop Grumman-produced center fuselage to the Lockheed Martin-built wing at the F-35's final assembly operation in Fort Worth.

Pratt & Whitney will deliver the aircraft's F135 engine before the end of December. The power plant, which produces 40,000 pounds of thrust, will make the F-35 the most powerful single-engine fighter ever to fly.

Lockheed Martin is developing the F-35 with its principal industrial partners, Northrop Grumman and BAE Systems. Two separate, interchangeable F-35 engines are under development: the Pratt & Whitney F135 turbofan and the F136 turbofan from the General Electric Rolls-Royce Fighter Engine Team.

FMI: www.lockheedmartin.com

Advertisement

More News

ANN's Daily Aero-Linx (06.29.25)

Aero Linx: Transport Canada We are a federal institution, leading the Transport Canada portfolio and working with our partners. Transport Canada is responsible for transportation p>[...]

ANN's Daily Aero-Term (06.29.25): Gross Navigation Error (GNE)

Gross Navigation Error (GNE) A lateral deviation from a cleared track, normally in excess of 25 Nautical Miles (NM). More stringent standards (for example, 10NM in some parts of th>[...]

Classic Aero-TV: Anticipating Futurespace - Blue Origin Visits Airventure 2017

From AirVenture 2017 (YouTube Edition): Flight-Proven Booster On Display At AirVenture… EAA AirVenture Oshkosh is known primarily as a celebration of experimental and amateu>[...]

NTSB Final Report: Cirrus SR22

Aircraft Parachute System (CAPS) Was Deployed About 293 Ft Above Ground Level, Which Was Too Low To Allow For Full Deployment Of The Parachute System Analysis: The day before the a>[...]

Airborne Affordable Flyers 06.26.25: PA18 Upgrades, ‘Delta Force’, Rhinebeck

Also: 48th Annual Air Race Classic, Hot Air Balloon Fire, FAA v Banning 100LL, Complete Remote Pilot The news Piper PA-18 Super Cub owners have been waiting for has finally arrived>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC