December Marks 50th Anniversary Of SR-71 First Flight | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-11.17.25

AirborneNextGen-
11.11.25

Airborne-Unlimited-11.12.25

Airborne-FltTraining-11.13.25

AirborneUnlimited-11.14.25

LIVE MOSAIC Town Hall (Archived): www.airborne-live.net

Wed, Dec 24, 2014

December Marks 50th Anniversary Of SR-71 First Flight

Airplane Retired In 1999 Still Holds Many Speed, Altitude Records

On Dec. 22, 1964 – one of the most remarkable aircraft in history made its first flight, the SR-71 Blackbird. Throughout its career the SR-71 was the fastest, highest-flying aircraft in the world. In its more than 3,500 strategic reconnaissance missions it routinely flew at Mach-3 and cruised above 85,000 feet. Despite being retired finally in 1999 the SR-71 still holds many official speed and altitude records.

Lockheed's famous Skunk Works came up with the SR-71 after pilot Francis Gary Powers' U-2 was shot down by a Soviet surface-to-air missile in May, 1960. The idea was to create a plane that could immediately escape from missiles, flying faster than a rifle bullet. At its heart would be twin Pratt & Whitney J58s, perhaps the most technically challenging engine Pratt & Whitney has ever built

At the Mach 3-plus cruising speed the engine operated at incredibly high temperatures. Almost no material used in conventional engines would work in the J58. Pratt & Whitney engineers had to come up with new alloys for turbine blades, new ways to forge and heat treat disks, and new manufacturing processes to roll superalloy sheets into engine cases. The engine even needed a new Pratt & Whitney eagle logo made out of stainless steel. The ceramic material used on the standard engine badge cracked and flaked when exposed to J58 temperatures.

A new kind of dual-cycle engine was created because at Mach-3 or better there were serious air flow problems. The J58 would operate like a turbo jet up to about Mach-3, all the air would flow through the engine core. Above that, a "bleed bypass cycle" takes some of the compressor air around the rear stages and is then reintroduced for afterburning. This boosts thrust significantly with no significant increase in fuel burn.

An interesting note, the original starter for the J58 was a ground cart equipped with two Buick Wildcat V8 engines.

(Images from file)

FMI: www.nationalmuseum.af.mil/factsheets/factsheet.asp?id=395

Advertisement

More News

NTSB Prelim: Funk B85C

According To The Witness, Once The Airplane Landed, It Continued To Roll In A Relatively Straight Line Until It Impacted A Tree In His Front Yard On November 4, 2025, about 12:45 e>[...]

Aero-News: Quote of the Day (11.21.25)

"In the frame-by-frame photos from the surveillance video, the left engine can be seen rotating upward from the wing, and as it detaches from the wing, a fire ignites that engulfs >[...]

ANN's Daily Aero-Term (11.21.25): Radar Required

Radar Required A term displayed on charts and approach plates and included in FDC NOTAMs to alert pilots that segments of either an instrument approach procedure or a route are not>[...]

Classic Aero-TV: ScaleBirds Seeks P-36 Replica Beta Builders

From 2023 (YouTube Edition): It’s a Small World After All… Founded in 2011 by pilot, aircraft designer and builder, and U.S. Air Force veteran Sam Watrous, Uncasville,>[...]

Airborne 11.21.25: NTSB on UPS Accident, Shutdown Protections, Enstrom Update

Also: UFC Buys Tecnams, Emirates B777-9 Buy, Allegiant Pickets, F-22 And MQ-20 The NTSB's preliminary report on the UPS Flight 2976 crash has focused on the left engine pylon's sep>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC