Fri, Jun 17, 2022
AD 2022-13-03 Requires The Removal Of Any Installed P/N Cb2990 (Alugas) Fuel Cylinder
The FAA is adopting a new airworthiness directive (AD) for certain Cameron Balloons Ltd. (Cameron) fuel cylinders installed on hot air balloons.
This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as cracks in the weld between the cylinder valve plate and the upper dished end of Cameron part number (P/N) CB2990 (Alugas) fuel cylinders, which could allow uncontrolled fuel leakage of liquid propane. This AD requires the removal of any installed P/N CB2990 (Alugas) fuel cylinder from service before further flight. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective June 30, 2022. The FAA must receive comments on this AD by August 1, 2022.
Supplementary Information: The Civil Aviation Authority (CAA), which is the airworthiness authority for the United Kingdom (UK), has issued CAA Emergency AD G-2022-0010-E, dated May 12, 2022 (referred to after this as “the MCAI”), to address an unsafe condition for certain Cameron fuel cylinders. The MCAI states: Five CB2990 (Alugas) cylinders have developed cracks in the weld between the cylinder valve plate and the upper dished end.
These cracks allow the release of propane from the cylinder. Failures have been observed during periodic inspection (hydraulic pressure test) and leak test. All the in-service failures seen to date have been from the batch of cylinders with serial numbers starting OC. It is likely that other CB2990 cylinders may develop similar failures in service. To address this potential unsafe condition this [UK CAA Emergency AD] * * * is issued to temporarily withdraw all CB2990 (Alugas) cylinders from service pending investigation of these failures. Cameron Balloons are working urgently with the original fabricator to determine the cause and scope of these failures. You may examine the MCAI in the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2022-0683. This condition, if not addressed, could lead to fire or explosion and consequent emergency landing. The FAA is issuing this AD to address the unsafe condition on these products.
More News
Aero Linx: Model Aeronautical Association of Australia MAAA clubs are about fun flying, camaraderie and community. For over 75 years, the MAAA has been Australia’s largest fl>[...]
Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]
“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]
How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]
Student Pilot Reported That During Rotation, “All Of A Sudden The Back Of The Plane Kicked To The Right..." Analysis: The student pilot reported that during rotation, “>[...]