Fri, Jun 17, 2022
AD 2022-13-03 Requires The Removal Of Any Installed P/N Cb2990 (Alugas) Fuel Cylinder
The FAA is adopting a new airworthiness directive (AD) for certain Cameron Balloons Ltd. (Cameron) fuel cylinders installed on hot air balloons.
This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as cracks in the weld between the cylinder valve plate and the upper dished end of Cameron part number (P/N) CB2990 (Alugas) fuel cylinders, which could allow uncontrolled fuel leakage of liquid propane. This AD requires the removal of any installed P/N CB2990 (Alugas) fuel cylinder from service before further flight. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective June 30, 2022. The FAA must receive comments on this AD by August 1, 2022.
Supplementary Information: The Civil Aviation Authority (CAA), which is the airworthiness authority for the United Kingdom (UK), has issued CAA Emergency AD G-2022-0010-E, dated May 12, 2022 (referred to after this as “the MCAI”), to address an unsafe condition for certain Cameron fuel cylinders. The MCAI states: Five CB2990 (Alugas) cylinders have developed cracks in the weld between the cylinder valve plate and the upper dished end.
These cracks allow the release of propane from the cylinder. Failures have been observed during periodic inspection (hydraulic pressure test) and leak test. All the in-service failures seen to date have been from the batch of cylinders with serial numbers starting OC. It is likely that other CB2990 cylinders may develop similar failures in service. To address this potential unsafe condition this [UK CAA Emergency AD] * * * is issued to temporarily withdraw all CB2990 (Alugas) cylinders from service pending investigation of these failures. Cameron Balloons are working urgently with the original fabricator to determine the cause and scope of these failures. You may examine the MCAI in the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2022-0683. This condition, if not addressed, could lead to fire or explosion and consequent emergency landing. The FAA is issuing this AD to address the unsafe condition on these products.
More News
Hold Procedure A predetermined maneuver which keeps aircraft within a specified airspace while awaiting further clearance from air traffic control. Also used during ground operatio>[...]
Altitude Readout An aircraft’s altitude, transmitted via the Mode C transponder feature, that is visually displayed in 100-foot increments on a radar scope having readout cap>[...]
Aero Linx: European Hang Gliding and Paragliding Union (EHPU) The general aim of the EHPU is to promote and protect hang gliding and paragliding in Europe. In order to achieve this>[...]
Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]
"The need for innovation at speed and scale is greater than ever. The X-62A VISTA is a crucial platform in our efforts to develop, test and integrate AI, as well as to establish AI>[...]