EASA Issues Emergency AD For Some A380 Engines | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Wed, Nov 24, 2010

EASA Issues Emergency AD For Some A380 Engines

Inspections Required For Rolls-Royce Trent Series 900 Engines

EASA has issued an emergency AD for Rolls-Royce RB211 Trent 900 series engines, variants RB211 Trent 970-84, RB211 Trent 970B-84, RB211 Trent 972-84, RB211 Trent 972B-84, RB211 Trent 977-84, RB211 Trent 977B-84 and RB211 Trent 980-84 (all serial numbers) known to be installed on, but not limited to, Airbus A380 series airplanes.

The AD requires High Pressure / Intermediate Pressure (HP/IP) Structure Inspections.

The AD, 2010-0242-E, follows the uncontained engine failure which recently occurred on a Rolls-Royce Trent 900 involving release of high energy debris and leading to damage to the airplane. Analysis of the preliminary elements from the incident investigation shows that an oil fire in the HP/IP structure cavity may have caused a sequence of events leading to failure of the Intermediate Pressure Turbine (IPT) Disc.

This condition, if not detected and corrected, could result in additional uncontained engine failures, possibly leading to damage to the airplane and injury to persons on the ground. Pending conclusion of the investigation, EASA issued AD 2010-0236-E to require repetitive inspections of the Low Pressure Turbine (LPT) stage 1 blades and case drain, HP/IP structure air buffer cavity and oil service tubes in order to detect any abnormal oil leakage, and if any discrepancy is found, to prohibit further engine operation.

Since issuance of AD 2010-0236-E, the incident investigation has progressed and inspection data from in-service engines has been gathered and analysed. The results of this analysis show the need to amend the inspection procedure, EASA AD No: EASA Form 111 Page 2/3 retaining the inspection of the air buffer cavity and focusing on the oil service tubes within the HP/IP structure.

For the reasons described above, this AD partially retains the requirements of AD 2010-0236-E, which is superseded, and requires implementation of the amended procedure and accomplishment of the associated inspections.EASA says  The requirements of this AD are considered as interim action. If, as a result of the on-going incident investigation, a terminating action is later identified, further mandatory actions might be considered.

FMI: www.easa.europa.eu

Advertisement

More News

ANN's Daily Aero-Linx (05.02.24)

Aero Linx: Model Aeronautical Association of Australia MAAA clubs are about fun flying, camaraderie and community. For over 75 years, the MAAA has been Australia’s largest fl>[...]

ANN's Daily Aero-Term (05.02.24): Touchdown Zone Lighting

Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]

Aero-News: Quote of the Day (05.02.24)

“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

NTSB Final Report: Cirrus Design Corp SR20

Student Pilot Reported That During Rotation, “All Of A Sudden The Back Of The Plane Kicked To The Right..." Analysis: The student pilot reported that during rotation, “>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC