Aeroflex Introduces Programmable Attenuator Units | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Sat, Mar 15, 2014

Aeroflex Introduces Programmable Attenuator Units

Single And Dual Channel Configurations In Half-Rack Enclosures

Aeroflex/Weinschel’s New Series of Programmable Attenuator Units represent a streamlined approach in programmable attenuation for bench test and subsystem applications. Standard 8320, 8321 and 8331 Series designs house and control various Aeroflex/Weinschel Programmable Attenuator Models (3200-XE, 3400, 150T, and 4200 Series) via front panel controls (8320 & 8321 only), Ethernet, USB and Serial communications interfaces. A GPIB (IEEE-488) interface is also available as an option on Models 8320 and 8321 only.

The 8320 series are single or dual channel configurations housed in half rack enclosures. The 8321 series are multi-channel configurations housed in 19 inch enclosures and can be configured for up to 12 attenuation channels. Both series can be configured with RF connectors on the front or rear of the unit. Through (front to rear) configurations are available only for 8321 Series. Model 8331 Series offers a lower cost solution for automated bench test and subsystem applications.

Most 8331 Series are multi-channel configurations where RF signal is routed through either the front or rear mounted ports. This series can be configured for up to 12 independent channels of attenuation and can be controlled via Ethernet, USB and Serial communications interfaces.

Labview based Attenuator Control Center Software (ACCS) is included and can be used in conjunction with the operation of this series of programmable attenuator units and allows the user to setup, control and perform test and measurements over standard communication interfaces.

Aeroflex/Weinschel also provides custom subsystems where a variety of test configurations can be incorporated within a single unit.

(Image provided by Aeroflex)

FMI: www.aeroflex.com

Advertisement

More News

Airborne-Flight Training 05.09.24: ERAU at AIAA, LIFT Diamond Buy, Epic A&P

Also: Vertical Flight Society, NBAA Maintenance Conference, GA Honored, AMT Scholarship For the first time, students from Embry-Riddle’s Daytona Beach, Florida, campus took t>[...]

ANN's Daily Aero-Term (05.07.24): Hazardous Weather Information

Hazardous Weather Information Summary of significant meteorological information (SIGMET/WS), convective significant meteorological information (convective SIGMET/WST), urgent pilot>[...]

Aero-News: Quote of the Day (05.07.24)

"The need for innovation at speed and scale is greater than ever. The X-62A VISTA is a crucial platform in our efforts to develop, test and integrate AI, as well as to establish AI>[...]

NTSB Final Report: Cessna 150

(FAA) Inspector Observed That Both Fuel Tanks Were Intact And That Only A Minimal Amount Of Fuel Remained In Each Analysis: According to the pilot, approximately 8 miles from the d>[...]

Aero-News: Quote of the Day (05.08.24)

“Pyka’s Pelican Cargo is unlike any other UAS solution on the market for contested logistics. We assessed a number of leading capabilities and concluded that the Pelica>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC