Is Yuba City Near Area 51? | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Thu, Oct 21, 2004

Is Yuba City Near Area 51?

California Company Completes Work On Flying Saucer Mock-Up

As far as we know, Yuba City (CA) is nowhere near Roswell (NM). But both can lay claim to reports of flying saucers in the vicinity. The only difference is, the Yuba City flying saucer is most assuredly real.

CADD Van Du LLC describes the XB-2 plane as the equivalent of a functional flying saucer. It certainly looks like one. But the plane is real and could help save people’s lives.

CADD Van Du says it has finished a carbon-fiber, mock-up model this week to ship to the Nara Institute of Science and Technology in Japan where doctoral candidate William Rieken is researching the plane as his dissertation. The eight-foot-wide, unmanned plane would be equipped with cameras and sensors to find lost people or to be used for police and intelligence work.

The plane is designed to lift and take off from a standstill, flying at 250 mph to its destination where it will take a 360-degree picture of the surroundings. CADD Van Du expects to ink a contract by the end of the month to build as many as 10 of the planes that can fly, said Donn Van Dusen, CADD Van Du’s manager and chief operating officer. The mock-up version just completed is a nonflying version without engines. It will be used to test the plane’s cameras.

If CADD Van Du gets the deal, plans are to expand into another Yuba City location and hire as many as 16 additional employees. The company has to raise money to build the planes and is looking mainly for grants, Van Dusen said. The small, six-person company has made a $20,000 bid to build the planes, spending about a thousand employee hours on the seven-week project.

It went ahead and built the mock-up model on its own after a manufacturing deal with another company fell through, turning Rieken’s basic designs into the carbon fiber model. That has meant long days for the product development firm’s employees. Van Dusen said he worked 42 hours straight last week when he was molding the carbon fiber mock-up.

"It’s been a huge challenge day to day," Van Dusen said.

FMI: www.caddvandu.com

Advertisement

More News

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

ANN's Daily Aero-Linx (05.11.24)

Aero Linx: Pararescue Air Force Pararescuemen, also known as PJs, are the only DoD elite combat forces specifically organized, trained, equipped, and postured to conduct full spect>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC