AD: Rolls-Royce plc Turbofan Engines | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Thu, Apr 18, 2013

AD: Rolls-Royce plc Turbofan Engines

AD NUMBER: 2013-05-04

PRODUCT: Certain Rolls-Royce plc (RR) RB211-Trent 970-84, RB211-Trent 970B-84, RB211-Trent 972-84, RB211-Trent 972B-84, RB211- Trent 977-84, RB211-Trent 977B-84, and RB211-Trent 980-84 turbofan engines.
SUBJECT: Airworthiness Directive 2013-05-04
ACTION: Final Rule, Request for Comments

SUMMARY: The FAA is adopting a new airworthiness directive (AD) for the product listed above. This AD requires inspection of the intermediate pressure compressor rear stub shaft (IPC RSS) piston ring. This AD was prompted by the failure of an oil pump drive shear neck due to a piston ring seal that was not seated properly in the IPC RSS groove. The FAA is issuing this AD to prevent failure of the oil pump drive shear neck, which could result in loss of oil pressure in one or more engines and reduced control of the airplane.

DATES: This AD becomes effective April 30, 2013. Comments are due no later than May 30, 2013.

FMI: AD

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC