NTSB Cites Pilot Error In Alaska Accident Involving A Bull | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Sun, Jul 03, 2011

NTSB Cites Pilot Error In Alaska Accident Involving A Bull

R44 Became Entangled In Plastic Along With The Animal

Alaska is known for its heavy use of aircraft in innumerable situations. But in this case, a ranch hand flying an R44 found himself at the wrong end of what must have been a very bizarre situation, with fatal results.

According to the NTSB's probable cause report, on June 19, 2010, about 1700 Alaska daylight time, a Robinson R44 helicopter, N333DV, sustained substantial damage when it collided with terrain about 62 miles southwest of Unalaska, Alaska. The helicopter was being operated by the pilot as a visual flight rules (VFR)other work use flight, in conjunction with a cattle ranch, under Title 14, CFR Part 91, when the accident occurred. The solo commercial pilot died in the accident. Visual meteorological conditions prevailed, and company flight following procedures were in effect.

During a telephone conversation with the National Transportation Safety Board (NTSB) investigator-in-charge on June 19, an official for the cattle ranch said another pilot at the ranch told her the helicopter pilot had just dropped off two employees for a cattle count, and upon departure, the helicopter had "caught a skid," and impacted terrain. The employees attempted to render aid to the accident pilot, but she was told the pilot died. The employees reported they did not think there were any problems with the helicopter prior to the accident.


R44 File Photo

In a written statement provided to the NTSB IIC by one of the ranch employees who witnessed the accident, the witness reported that he and another employee were in the helicopter with the pilot, surveying the ranch property, when they spotted a bull that had become entangled in plastic wrapping material. He said he and the other employee got out of the helicopter, and the pilot attempted to herd the bull toward them so they could cut the plastic off. The witness said the bull would not cooperate, and the pilot tried to land on the trailing plastic so they could tackle the bull. The witness also reported that the pilot tried to knock the bull down with the helicopter. He said eventually the pilot got the helicopter's right landing gear skid under the plastic and tried to pick the bull up, but the plastic broke. He said the pilot hooked the skid under the plastic again, but this time the plastic did not break, and as the helicopter lifted the bull off the ground the helicopter moved forward and to the right, and impacted the ground.

Due to the remote location, the helicopter was not examined by the NTSB.

A postmortem examination of the pilot was conducted under the authority of the Alaska State Medical Examiner, 4500 South Boniface Parkway, Anchorage, Alaska, on June 25, 2010. The examination revealed the cause of death for the pilot was attributed to multiple blunt force injuries.

The FAA's Civil Aeromedical Institute (CAMI) conducted a toxicological examination on August 12, 2010, which detected amounts of Ethanol, Methanol, and N-Propanol. The Ethanol in this case was from sources other than consumption. Ibuprofen was detected in the urine.

The National Transportation Safety Board determines the probable cause of this accident to be the pilot's inappropriate low altitude maneuvering, which resulted in a collision with terrain.

FMI: www.ntwb.gov

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC