NTSB Prelim: Cessna A188 | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Sun, May 09, 2021

NTSB Prelim: Cessna A188

He Heard A “Loud Pop”, And The Engine Lost All Power

Location: Dover, NC Accident Number: ERA21LA188
Date & Time: April 15, 2021, 16:05 Local Registration: N731TB
Aircraft: Cessna A188 Injuries: 1 None
Flight Conducted Under: Part 91: General aviation - Personal

On April 15, 2021, at 1605 eastern daylight time, a Cessna A188B, N731TB, was substantially damaged when it was involved in an accident near Dover, North Carolina. The pilot was not injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight.

According to the pilot, he fueled the airplane prior to the flight at a private airport. The purpose of the accident flight was for the pilot to familiarize himself with the airplane and to practice maneuvers in advance of the spraying season. The agricultural airplane’s hopper was empty, there was no intent to spray chemicals. A few minutes after takeoff, at an altitude of about 300 ft, he heard a “loud pop”, and the engine lost all power. He looked at the engine gauges and noticed that there was “no fuel flow”. As the propeller windmilled, he unsuccessfully attempted to restart the engine, then elected to perform a forced landing to a nearby corn field. He described that the landing was “hard”.

Examination of the airplane at the accident site by a Federal Aviation Administration inspector revealed leading edge damage and compression buckling of the top of the left wing, outboard of the wing strut and extended aft of the wing spar. The left side of the empennage was buckled just forward of the vertical stabilizer. The right horizontal stabilizer was bent upward slightly, about 12 inches from its root. The upper surface of the right elevator was buckled forward of trim tab. When the inspector attempted to rotate the propeller by hand, she heard a “clink” sound, and the propeller would not rotate.

A review of the airplane’s maintenance records revealed that the most recent annual inspection was performed 9 days (11 flight hours) prior to the accident. The previous annual inspection was performed in September 2019 (73 flight hours prior to the accident). The airplane was retained for further examination.

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC