AD: Diamond | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.14.24

Airborne-Unlimited-05.15.24 Airborne-AffordableFlyers-05.16.24

Airborne-Unlimited-05.17.24

Sat, May 14, 2011

AD: Diamond

AD NUMBER: 2011-10-13

MANUFACTURER: Diamond Aircraft Industries GmbH Models DA 42, DA 42 NG, and DA 42 M-NG Airplanes
SUBJECT: Airworthiness Directive 2011-10-13

SUMMARY: The FAA is adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

Since 2004, more than 30 reports have been received of in-flight loss of a rear passenger door on Diamond airplanes, the majority of which were DA 40s. In addition at least 18 doors have been replaced because of damage found on the hinge. Diamond Aircraft Industries conducted analyses and structural tests to determine the root cause of the door opening in flight. The conclusions were that the primary locking mechanism provided adequate strength to react to the loads in flight. It was also determined that the root cause was the crew not properly securing the rear passenger door by the main locking mechanism, prior to flight. Damage to the hinges has been caused primarily by external loads (wind gust conditions) while the airplane was parked.

All DA 40 and DA 42 airplanes have a system installed that provides a warning if the main door latch is not fully closed and a secondary safety latch (with retaining bracket) design feature. The initial intended design function of the latch was to hold the rear passenger door in the "near closed" position while on the ground, protecting the door from wind gusts. However, the original retaining bracket Part Number (P/N) DA4-5200-00-69 might not hold the door in this "near closed" position while in flight.

This condition, if not corrected, could result in the rear passenger door opening and departing the airplane in flight.

This AD to requires actions to correct the unsafe condition on these products.

FMI: http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgAD.nsf/0/AE2B382617F32C518625788F004B61DB?OpenDocument

 


Advertisement

More News

Bolen Gives Congress a Rare Thumbs-Up

Aviation Governance Secured...At Least For a While The National Business Aviation Association similarly applauded the passage of the FAA's recent reauthorization, contentedly recou>[...]

The SportPlane Resource Guide RETURNS!!!!

Emphasis On Growing The Future of Aviation Through Concentration on 'AFFORDABLE FLYERS' It's been a number of years since the Latest Edition of Jim Campbell's HUGE SportPlane Resou>[...]

Buying Sprees Continue: Textron eAviation Takes On Amazilia Aerospace

Amazilia Aerospace GmbH, Develops Digital Flight Control, Flight Guidance And Vehicle Management Systems Textron eAviation has acquired substantially all the assets of Amazilia Aer>[...]

Hawker 4000 Bizjets Gain Nav System, Data Link STC

Honeywell's Primus Brings New Tools and Niceties for Hawker Operators Hawker 4000 business jet operators have a new installation on the table, now that the FAA has granted an STC f>[...]

Echodyne Gets BVLOS Waiver for AiRanger Aircraft

Company Celebrates Niche-but-Important Advancement in Industry Standards Echodyne has announced full integration of its proprietary 'EchoFlight' radar into the e American Aerospace>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC