GE Honda Aero Engines Continues Testing On HF120 Engine | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Fri, May 25, 2007

GE Honda Aero Engines Continues Testing On HF120 Engine

Will Power HondaJet, Spectrum S-40

With successful tests of a HF120 engine core completed in April, GE Honda Aero Engines is now preparing to run a second core test in May, followed by a full engine test in July.

They are part of several key tests in 2007 to validate design enhancements, as the HF120 readies to power business jets by 2010. Before the end of the year, GE Honda Aero Engines expects to finalize design and release hardware for the first HF120 engines that will undergo certification testing in 2008.

The GE Honda H120 engine was formally launched in October 2006, when it was selected to power both the HondaJet advanced light jet and the Spectrum Aeronautical "Freedom" business jet. To date, more than 200 HF120 engines are on order. HF120 certification is targeted for 2009, with entry into service on both aircraft scheduled to begin in 2010.  Spectrum

Early in the next decade, the annual production capacity for the HF120 engine is expected to reach 140 engines, which is based on the promising outlook for new-generation light business jets.

The HF120 engine, rated at 2,050 pounds of thrust, succeeds Honda's original HF118 prototype engine, which has accumulated more than 4,000 hours of testing on the ground and in-flight. GE and Honda redesigned the engine for higher thrust, while seeking new standards of performance in terms of fuel efficiency, durability, and low noise and emissions.

GE Honda tested the redesigned HF120 core (compressor, combustor, high-pressure turbine) at Honda's WAKO R&D Center in Japan in March and April. The tests validated the aeromechanical characteristics of the compressor and turbine airfoils. The second core test in May will focus on overall component performance and engine thermal characteristics.

"The full turbofan engine test in July will demonstrate performance and systems capabilities," said Bill Dwyer, president of GE Honda Aero Engines. "We have an aggressive 2007 test plan to assure that our final design is ready for certification. We are very encouraged with the recently completed core tests."

FMI: www.gehonda.com

Advertisement

More News

ANN's Daily Aero-Term (04.26.24): DETRESFA (Distress Phrase)

DETRESFA (Distress Phrase) The code word used to designate an emergency phase wherein there is reasonable certainty that an aircraft and its occupants are threatened by grave and i>[...]

Aero-News: Quote of the Day (04.26.24)

"General aviation is at the forefront of developing and introducing innovative technologies that will transform the entire aviation industry..." Source: Kyle Martin, Vice President>[...]

ANN's Daily Aero-Term (04.27.24): Direct

Direct Straight line flight between two navigational aids, fixes, points, or any combination thereof. When used by pilots in describing off-airway routes, points defining direct ro>[...]

ANN's Daily Aero-Linx (04.27.24)

Aero Linx: Women in Corporate Aviation Women in Corporate Aviation support individuals seeking career advancement and professional development in the business aviation industry. Me>[...]

Aero-News: Quote of the Day (04.27.24)

“We would like to thank the many volunteers that help throughout the year to pull off the event, as well as the several reviewers, judges, and SURVICE staff that provide team>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC