AD: The Boeing Company Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.14.24

Airborne-Unlimited-05.15.24 Airborne-AffordableFlyers-05.16.24

Airborne-Unlimited-05.17.24

Thu, May 12, 2022

AD: The Boeing Company Airplanes

AD 2022-08-12 Prompted By Reports Of Bolt Rotation In The Engine Drag Fitting Joint...

The FAA is superseding Airworthiness Directive (AD) 2020-21-17, which applied to all The Boeing Company Model 757 airplanes.

AD 2020-21-17 required repetitive inspections for skin cracking and shim migration at the upper link drag fittings, diagonal brace cracking, and fastener looseness; and applicable on-condition actions. This AD was prompted by reports of bolt rotation in the engine drag fitting joint and fastener heads and cracks found in the skin of the fastener holes, and the need to reduce the compliance time for certain groups. This AD retains the requirements of AD 2020-21-17 with reduced compliance times for certain airplane groups. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective June 10, 2022.

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to supersede AD 2020-21-17, Amendment 39-21290 (85 FR 79418, December 10, 2020) (AD 2020-2117). AD 2020-21-17 applied to all The Boeing Company Model 757 airplanes. The NPRM published in the Federal Register on September 9, 2021 (86 FR 50485). The NPRM was prompted by reports of bolt rotation in the engine drag fitting joint and fastener heads and cracks found in the skin of the fastener holes, and the need to reduce the compliance time for certain groups. In the NPRM, the FAA proposed to retain the requirements of AD 2020-21-17 with reduced compliance times for certain airplane groups. The FAA is issuing this AD to address cracking in the wing upper skin and forward drag fittings, which could lead to a compromised upper link and reduced structural integrity of the engine strut, and possible separation of a strut and engine from the airplane during flight.

FMI: www.regulations.gov

Advertisement

More News

Bolen Gives Congress a Rare Thumbs-Up

Aviation Governance Secured...At Least For a While The National Business Aviation Association similarly applauded the passage of the FAA's recent reauthorization, contentedly recou>[...]

The SportPlane Resource Guide RETURNS!!!!

Emphasis On Growing The Future of Aviation Through Concentration on 'AFFORDABLE FLYERS' It's been a number of years since the Latest Edition of Jim Campbell's HUGE SportPlane Resou>[...]

Buying Sprees Continue: Textron eAviation Takes On Amazilia Aerospace

Amazilia Aerospace GmbH, Develops Digital Flight Control, Flight Guidance And Vehicle Management Systems Textron eAviation has acquired substantially all the assets of Amazilia Aer>[...]

Hawker 4000 Bizjets Gain Nav System, Data Link STC

Honeywell's Primus Brings New Tools and Niceties for Hawker Operators Hawker 4000 business jet operators have a new installation on the table, now that the FAA has granted an STC f>[...]

Echodyne Gets BVLOS Waiver for AiRanger Aircraft

Company Celebrates Niche-but-Important Advancement in Industry Standards Echodyne has announced full integration of its proprietary 'EchoFlight' radar into the e American Aerospace>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC