SECAF: $1,280 Coffee Cups Are 'Simply Irresponsible' | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Thu, Nov 08, 2018

SECAF: $1,280 Coffee Cups Are 'Simply Irresponsible'

Sends A Letter To Senate Judiciary Committee Chair Chuck Grassley (R-IA)

Secretary of the Air Force (SECAF) Heather Wilson (pictured) has sent a letter to Senate Judiciary Committee Chairman Chuck Grassley (R-IA) that is critical of what she says is "wasteful spending in the Department of Defense."

The letter was sent to Grassley in response to his request for information related to the procurement of special coffee mugs that can reheat liquids which are used aboard air refueling tankers in flight. The mugs have increased in price from $693 each to $1,280 each since 2016. But USA Today reports that Tech Sgt. James Hodgman, a spokesman for a tanker squadron at Travis AFB in California, said in an interview with Fox News that the handles of the mugs have a tendency to shatter when they are dropped. "Unfortunately, when dropped, the handle breaks easily leading to the expenditure of several thousand dollars to replace the cups as replacement parts are not available," he said in the interview.

In her response to Grassley's questions concerning the cost, Wilson said that the item "is a specially manufactured electronic water-heater that plugs into aircraft systems. Because in connects to the aircraft, replacement require FAA airworthiness certification. The Air Force has purchase 391 of these items since 2016 at a total cost of $326,785."

In her letter, Wilson said that many suppliers have either stopped producing certain parts or have gone out of business. She said it is "simply irresponsible to spend thousands of dollars on manufactured parts when we have the technology available to produce them ourselves. In July 2018, I directed creation of the Air Force Rapid Sustainment Office to further develop agile manufacturing (3D printing, cold spray, digital modeling, ect.) to develop and deliver parts at a fraction of the cost of using traditional manufacturing methods. We recently demonstrated capability to 3-D print replacement handles for this item at a cost of about 50 cents each."

(Image from file)

FMI: Source report, Letter

Advertisement

More News

Airborne-Flight Training 05.09.24: ERAU at AIAA, LIFT Diamond Buy, Epic A&P

Also: Vertical Flight Society, NBAA Maintenance Conference, GA Honored, AMT Scholarship For the first time, students from Embry-Riddle’s Daytona Beach, Florida, campus took t>[...]

ANN's Daily Aero-Term (05.07.24): Hazardous Weather Information

Hazardous Weather Information Summary of significant meteorological information (SIGMET/WS), convective significant meteorological information (convective SIGMET/WST), urgent pilot>[...]

Aero-News: Quote of the Day (05.07.24)

"The need for innovation at speed and scale is greater than ever. The X-62A VISTA is a crucial platform in our efforts to develop, test and integrate AI, as well as to establish AI>[...]

NTSB Final Report: Cessna 150

(FAA) Inspector Observed That Both Fuel Tanks Were Intact And That Only A Minimal Amount Of Fuel Remained In Each Analysis: According to the pilot, approximately 8 miles from the d>[...]

Aero-News: Quote of the Day (05.08.24)

“Pyka’s Pelican Cargo is unlike any other UAS solution on the market for contested logistics. We assessed a number of leading capabilities and concluded that the Pelica>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC