Sun, Jan 25, 2015
AD NUMBER: 2015-01-01
PRODUCT: Certain Boeing Model 777-200 and -300 series airplanes.
ACTION: Final Rule
SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2011-09-11, for the products listed above.
AD 2011-09-11 required repetitive inspections for hydraulic fluid contamination of the interior of the strut disconnect assembly; repetitive inspections for discrepancies of the interior of the strut disconnect assembly, if necessary; repetitive inspections of the exterior of the strut disconnect assembly for cracks, if necessary; corrective action if necessary; and an optional terminating action for the inspections.
This new AD adds, for certain airplanes, an inspection of the side and top cover plates to determine if all cover plate attach fasteners have been installed, and installing any missing fasteners including doing an inspection for damage, and repair if necessary. This AD was prompted by reports of side and top cover plates installed with missing fastener bolts, which results in an unsealed opening on the system disconnect assembly.
The FAA is issuing this AD to detect and correct hydraulic fluid contamination, which can cause cracking of titanium parts in the system disconnect assembly; and also to detect and correct missing fasteners, which results in unsealed openings on the system disconnect assembly. Both unsafe conditions can compromise the engine firewall and result in fire hazards for both the engine compartment and the strut.
DATES: This AD is effective February 26, 2015.
FMI: AD
More News
From 2023 (YouTube Version): Legacy of a Titan Robert (Bob) Anderson Hoover was a fighter pilot, test pilot, flight instructor, and air show superstar. More so, Bob Hoover was an i>[...]
Get The Latest in Aviation News NOW on Instagram Are you on Instagram yet? It's been around for a few years, quietly picking up traction mostly thanks to everybody's new obsession >[...]
Aero Linx: B-52H Stratofortress The B-52H Stratofortress is a long-range, heavy bomber that can perform a variety of missions. The bomber is capable of flying at high subsonic spee>[...]
Altimeter Setting The barometric pressure reading used to adjust a pressure altimeter for variations in existing atmospheric pressure or to the standard altimeter setting (29.92).>[...]
"Knowing that we play an active part in bettering people's lives is extremely rewarding. My team and I are very thankful for the opportunity to be here and to help in any way we ca>[...]