uAvionix Receives FAA TSO For Certified Drone GPS Receiver | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Thu, Aug 05, 2021

uAvionix Receives FAA TSO For Certified Drone GPS Receiver

Reportedly The First To Specifically Target UAS Platform Navigation And Surveillance

uAvionix Corporation announced it has received a Technical Standard Order (TSO) from the FAA for its “truFYX” Global Positioning System (GPS) receiver for UAS. The Satellite-Based Augmentation System (SBAS) / Wide Area Augmentation System (WAAS) capable GPS is reportedly the first to specifically target UAS platform navigation and surveillance solutions.

Small, the TSO-C145e Class Beta 1 GPS weighs in at only 20 grams, which includes the receiver, antenna, and DO-160G power supply, and interface protection circuits. A Class Beta 1 GPS enables the truFYX to be the primary position source for domestic en-route and terminal navigation, as well as the primary position source for ADS-B OUT solutions. The Source Integrity Level (SIL) 3, System Design Assurance (SDA) 2 system ensures reception and processing by Air Traffic Control (ATC) and Traffic Collision Avoidance System (TCAS) when used as a position source for ADS-B. For these reasons, the Airbus Zephyr program was announced as a truFYX launch customer in January 2021.

A certified position source for UAS navigation reduces position error by implementing a strict Receiver Autonomous Integrity Monitoring (RAIM) / Fault Detection and Exclusion (FDE) engine, and processing advanced SBAS messages designed to improve accuracy and integrity. These systems combine to detect unhealthy GPS satellite transmissions and remove them from the position calculation, providing critical differentiation from a typical commercial GPS receiver. Design Assurance Level (DAL) C software and hardware is achieved through the use of RTCA DO-178C and DO-254 engineering processes. truFYX is manufactured in Montana under an FAA Manufacturing Inspection District Office (MIDO) approved quality control process and facility.

FMI: www.uavionix.com

Advertisement

More News

Bolen Gives Congress a Rare Thumbs-Up

Aviation Governance Secured...At Least For a While The National Business Aviation Association similarly applauded the passage of the FAA's recent reauthorization, contentedly recou>[...]

The SportPlane Resource Guide RETURNS!!!!

Emphasis On Growing The Future of Aviation Through Concentration on 'AFFORDABLE FLYERS' It's been a number of years since the Latest Edition of Jim Campbell's HUGE SportPlane Resou>[...]

Buying Sprees Continue: Textron eAviation Takes On Amazilia Aerospace

Amazilia Aerospace GmbH, Develops Digital Flight Control, Flight Guidance And Vehicle Management Systems Textron eAviation has acquired substantially all the assets of Amazilia Aer>[...]

Hawker 4000 Bizjets Gain Nav System, Data Link STC

Honeywell's Primus Brings New Tools and Niceties for Hawker Operators Hawker 4000 business jet operators have a new installation on the table, now that the FAA has granted an STC f>[...]

Echodyne Gets BVLOS Waiver for AiRanger Aircraft

Company Celebrates Niche-but-Important Advancement in Industry Standards Echodyne has announced full integration of its proprietary 'EchoFlight' radar into the e American Aerospace>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC