Tue, May 19, 2009
The F135 short takeoff/vertical landing (STOVL) variant
propulsion system, which includes the Rolls-Royce LiftSystem, has
exceeded thrust performance expectations in recently completed
tests, providing more vertical power than required by the F-35
Lightning II STOVL aircraft. The testing was conducted on a
specially instrumented "hover pit" at Lockheed Martin in Fort
Worth, Texas.
"The F135 engine continues to exceed performance expectations to
deliver the most advanced, capable fifth generation fighter engine
for the F-35," said Warren Boley, vice president, Pratt &
Whitney F135/F119 Programs. "The engine demonstrated 41,100 pounds
of vertical thrust against our requirement of 40,550 pounds. This
means we will deliver excellent margin for the vertical landing and
short takeoff performance for our STOVL customers."
During hover-pit testing, the aircraft is anchored to a metal
grate 14 feet above a sloped concrete floor, separating the jet
from ground effect and enabling it to simulate free-air flight.
Sensors measure thrust and the aircraft's response to pilot inputs.
This is a highly integrated software driven airplane where the
testing also demonstrates functional operation of all systems
required for vertical flight.
This includes control of the doors associated with the STOVL
propulsion system: engine auxiliary inlet, LiftFan inlet, LiftFan
exit, roll posts, and doors that open to enable the Rolls-Royce
three-bearing swivel duct to articulate and vector engine thrust.
The hover-pit tests are the final series of ground tests before
airborne STOVL testing begins. The F135 STOVL propulsion system
includes the Pratt & Whitney main engine and the Rolls-Royce
LiftSystem components.
More News
Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]
"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]
Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]
“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]
Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]