Saab Presents New Wing Design | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Fri, Mar 25, 2011

Saab Presents New Wing Design

Claims Reduced Drag, Resulting In Fewer Emissions

Three years after start of the Smart Fixed Wing Aircraft (SFWA) project, a new unique wing demonstrator is presented for the first time. Saab says the new wing panel is one of several new features that will contribute substantially to reduce fuel consumption and emissions for aircraft in the future. The company has developed the new Smart Fixed Wing Aircraft (SFWA) wing panel demonstrator, which is one step closer to achieve Clean Sky's vision; to radically minimize adverse environmental impact from aviation by 2020.

"Because of the SFWA design, maintenance of laminar air flow is possible, which decrease the aircrafts total drag by at least 5 %", says Henrik Aslund, aerodynamicist.

Saab's contribution to the Clean Sky project is highly advanced technological knowledge. The major challenge is to preserve laminar air flow and avoid turbulent flow. Air flow is extremely sensitive to small steps, gaps and waviness which disturbs the laminar flow and makes it turbulent, thus increasing the friction imposed on the wing. Saab, being an experienced composite design and manufacturer, has new unique techniques which make the wing surfaces smooth enough to maintain laminar flow.

"This new design which also includes an integrated Leading Edge will impact the ways of building the future aircraft wing, reducing the time for assembly and enhance the surface quality allowing the laminar flow to be stable", says Thomas Hellstrom, Project Manager Clean Sky. As a result of this, SFWA helps reduce drag. This, in turn, reduces CO2 and NOx emissions as well as fuel consumption and noise caused by aircraft.

"This is the most complex and highly advanced composite article built by Saab. The panel has shown very good laminate and surface quality , which verifies that the design and tooling concept has proven to work", according to Jonas Bohlin, Sub-project manager, Clean Sky SFWA, Saab.

A complete wing panel with a length of almost 10 meters will be built by Saab in Linkoping 2013, and flight tested by Airbus on an A340 aircraft in France during 2014. The SFWA panel demonstrator was shown for the first time during Clean Sky's annual meeting on March 17th in Linkoping, Sweden.

FMI: www.saab.com

Advertisement

More News

ANN's Daily Aero-Linx (05.02.24)

Aero Linx: Model Aeronautical Association of Australia MAAA clubs are about fun flying, camaraderie and community. For over 75 years, the MAAA has been Australia’s largest fl>[...]

ANN's Daily Aero-Term (05.02.24): Touchdown Zone Lighting

Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]

Aero-News: Quote of the Day (05.02.24)

“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

NTSB Final Report: Cirrus Design Corp SR20

Student Pilot Reported That During Rotation, “All Of A Sudden The Back Of The Plane Kicked To The Right..." Analysis: The student pilot reported that during rotation, “>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC