NTSB Prelim: PZL Mielec M18 | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Tue, Aug 03, 2021

NTSB Prelim: PZL Mielec M18

The Left Wing Had Separated And Was Located About 120 Ft Northeast Of The Main Wreckage

Location: Seiling, OK Accident Number: CEN21FA314
Date & Time: July 12, 2021, 09:40 Local Registration: N9310R
Aircraft: PZL Mielec M18 Injuries: 1 Fatal
Flight Conducted Under: Part 137: Agricultural

On July 12, 2021, about 0940 central daylight time, a PZL Mielec M-18A “Dromader” airplane, N9310R, was destroyed when it was involved in an accident near Seiling, Oklahoma. The pilot was fatally injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 137 aerial application flight.

The airplane impacted a pasture about 1/2-mile north of the field being worked. The main wreckage consisted of the fuselage, engine, right wing, and empennage. A ground impact depression, oriented toward the northwest, was located immediately adjacent to the main wreckage. The left wing had separated and was located about 120 ft northeast of the main wreckage. The flight controls remained attached to the airframe with the exception of the right aileron and the outboard portion of the left elevator; both were located at the accident site.

An on-scene examination indicated that the left-wing main and rear spars had separated from the center wing structure. A preliminary visual examination of the left-wing main spar lower attachment revealed a fatigue crack that progressed through approximately 90% of the lower lug cross section with the remaining section fracturing in overstress. The separated upper lug fracture surface exhibited features consistent with overstress fracture. A metallurgical examination is pending.

FMI: www.ntsb.gov

Advertisement

More News

Airborne-Flight Training 05.09.24: ERAU at AIAA, LIFT Diamond Buy, Epic A&P

Also: Vertical Flight Society, NBAA Maintenance Conference, GA Honored, AMT Scholarship For the first time, students from Embry-Riddle’s Daytona Beach, Florida, campus took t>[...]

ANN's Daily Aero-Term (05.07.24): Hazardous Weather Information

Hazardous Weather Information Summary of significant meteorological information (SIGMET/WS), convective significant meteorological information (convective SIGMET/WST), urgent pilot>[...]

Aero-News: Quote of the Day (05.07.24)

"The need for innovation at speed and scale is greater than ever. The X-62A VISTA is a crucial platform in our efforts to develop, test and integrate AI, as well as to establish AI>[...]

NTSB Final Report: Cessna 150

(FAA) Inspector Observed That Both Fuel Tanks Were Intact And That Only A Minimal Amount Of Fuel Remained In Each Analysis: According to the pilot, approximately 8 miles from the d>[...]

Aero-News: Quote of the Day (05.08.24)

“Pyka’s Pelican Cargo is unlike any other UAS solution on the market for contested logistics. We assessed a number of leading capabilities and concluded that the Pelica>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC