NTSB Releases Preliminary Report In Accident Involving FAA Inspectors | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Tue, Jun 15, 2010

NTSB Releases Preliminary Report In Accident Involving FAA Inspectors

Nose Gear On FAA Plane Collapsed During Landing

The NTSB has released its preliminary report on an accident involving two FAA inspectors on a check flight earlier this month. The nose gear of the plane they were flying collapsed, damaging the airplane but leaving both pilots uninjured.

NTSB Identification: CEN10LA302
14 CFR Part 91: General Aviation
Accident occurred Thursday, June 03, 2010 in Fort Worth, TX
Aircraft: Beech C90, registration: N20
Injuries: 2 Uninjured.

This is preliminary information, subject to change, and may contain errors. Any errors in this report will be corrected when the final report has been completed.

On June 3, 2010, approximately 1430 DCT, a Beech C90, N20, registered to and operated by the FAA, was substantially damaged when the nose landing gear collapsed on landing at Alliance Fort Worth Airport (KAFW), Fort Worth, Texas. Visual meteorological conditions (VMC) prevailed at the time of the accident. The training flight was being conducted under the provisions of Title 14 Code of Federal Regulations (CFR) Part 91 without a flight plan. The two pilots on board the airplane were not injured. The local flight originated at 1305 from KAFW.

The purpose of the flight was to maintain inspector currency. After completion of air work, the airplane proceeded to Waco (KACT), Texas, where takeoffs and landings were performed. When the landing gear was cycled, the crew heard a loud "bang" and observed a GEAR UNSAFE indication. They returned to KAFW and made a low flyby. Tower reported that the main landing gear appeared to be up but the nose landing gear did not appear to be fully extended. The airplane proceeded west of KAFW to troubleshoot the problem. After discussing the situation with the chief pilot, the director of maintenance, and Hawker-Beech, the main landing gear was manually extended and the airplane landed on runway 34L. As speed dissipated, the nose gear folded and the airplane slid to a stop.

Post-accident examination revealed the internal gears in the nose gear actuator had sheared. Additionally, there was some structural damage to the bulkhead.

FMI: www.ntsb.gov
 

Advertisement

More News

Bolen Gives Congress a Rare Thumbs-Up

Aviation Governance Secured...At Least For a While The National Business Aviation Association similarly applauded the passage of the FAA's recent reauthorization, contentedly recou>[...]

The SportPlane Resource Guide RETURNS!!!!

Emphasis On Growing The Future of Aviation Through Concentration on 'AFFORDABLE FLYERS' It's been a number of years since the Latest Edition of Jim Campbell's HUGE SportPlane Resou>[...]

Buying Sprees Continue: Textron eAviation Takes On Amazilia Aerospace

Amazilia Aerospace GmbH, Develops Digital Flight Control, Flight Guidance And Vehicle Management Systems Textron eAviation has acquired substantially all the assets of Amazilia Aer>[...]

Hawker 4000 Bizjets Gain Nav System, Data Link STC

Honeywell's Primus Brings New Tools and Niceties for Hawker Operators Hawker 4000 business jet operators have a new installation on the table, now that the FAA has granted an STC f>[...]

Echodyne Gets BVLOS Waiver for AiRanger Aircraft

Company Celebrates Niche-but-Important Advancement in Industry Standards Echodyne has announced full integration of its proprietary 'EchoFlight' radar into the e American Aerospace>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC